DOWNLOAD LG WF-DS1100 Service Manual ↓ Size: 9.32 MB | Pages: 60 in PDF or view online for FREE

Press the DELAY START (RESERVATION) button to set the time when the delayed
washing is to be completed.

Press the POWER button to turn power on.

• If the lid is open,  the machine will not work, and an alarm  signal will alarm to remind you to close the lid. 
• To select washing program, spinning time, WATER LEVEL or HOT/COLD  manually, press the DELAY START

(RESERVATION)  button and select the desired option. Then press the START/PAUSE button.

• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the spinning program .

(The laundry will be wrinkled if left for a long time after spinning.)

Press the PROGRAM button to select the washing program.

• Select the  program for laundry on the Control panel.

This program will not work in WOOL, DELICATE and TUB CLEAN
Program.

• When you press the START/PAUSE button the light will blink.

•  How to set the delay time.

Example : It’s 7 a.m. now. If  you’d like your wash to finish

at 9 p.m. set the time as in the figure below. 

When you push the button the reservation time changes 
[3 

4 

5 

...12 

14 

16 

... 

48 

3] repeatedly.

Add the laundry and press the START/PAUSE button.

DELAY START (RESERVATION) Wash is used to delay the finishing time of the operation. 
The hours to be delayed can be set by the user accordingly. 
The time on the display is the finishing  time , not  the start time. 

Add the Detergent.

• The appropriate quantity of Detergent marked next to the 

WATER LEVEL of WATER•DETERGENT.

• When the lid is open the machine will not operate, and an alarm

signal will remind you to close the lid

Close the lid. 

Finish

• Water will be supplied for 2 minutes after the start of the wash to

supplement the water the laundry has absorbed.

The washing will be finished according to the delayed time.

(RES.=DELAY)

When you only need the Wash,Wash/Rinse or Rinse cycles, these can be set manually 

Select
WASH
time.

Add detergent
by display the
the digit.

Select
No. of
RINSE.

Select water
levels.

Select water
levels.

Select SPIN
time.

Close the lid. 
Press  
Start/ Pause
button.

Close the lid. 
Press  
Start/ Pause
button.

Close the lid. 
Press  
Start/ Pause
button.

Close the lid. 
Press  
Start/ Pause
button.

Select No.
of  RINSE
and SPIN
time.

Press the  POWER button.

If you want to lock all the keys to prevent  settings from being changed by a child, you can use
the child lock option.

If you want to use the washing machine without alarm signal sounds, press both the WASH and SPIN buttons
simultaneously. 
To make buzzer work, press both the WASH and SPIN buttons simultaneously one more time.

To see the remaining time for each process, press one of the WASH, RINSE and SPIN buttons. 
The remaining time for each process will appear for about 1 second.

If you want to unlock during wash, press both the RINSE and the SPIN button simultaneously again.

• Turn Power on.

Press both the RINSE button and the SPIN button simultaneously.

• During the wash program, all the buttons are locked until washing is

completed or until the child- lock function is deactivated manually.

• “         ” and the remaining time will be displayed alternately in

child-lock mode. 

Press the START/PAUSE button to start washing.

• After all washing conditions are set according to the manual.

• Close the water taps and remove the Water Supply Hose. 
• Remove the water which remains in the water supply.
• Lower the drain hose and drain the water in the bowl and the drain hose by spinning.

If you use fabric softener or do regular COLD water washing, it is very important that you occasionally clean
the inside of your washer.

• Fill your washer with HOT water.

• Add about two cups of a powdered Detergent that contains phosphate.

• Let it operate for several minutes.

• Stop the washer, open the lid and leave it to soak overnight.

• After soaking, drain the washer and run it through a normal cycle.

We do not recommend that you wash clothes during this procedure.

• Remove the water supply hose, and immerse it in HOT water at approx.. 40˚C.
• Pour approx.. 2 liters of HOT water at approx.. 40˚C, into the bowl and let it stand for 10 minutes.
• Connect the water supply hose to the water tap and confirm that the washing machine performs the supply

and drainage of water.

Leave the lid open after washing to allow moisture to evaporate. If you want to clean the
inner-tub use a clean soft cloth dampened with liquid Detergent, then rinse. 
(Do not use harsh or gritty cleaners.) 

Hoses connecting washer to faucet should be replaced every 5 years.

Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with sharp
objects.

Be sure water supply is shut off at faucets. Drain all water from hoses if weather will be
below freezing.