DOWNLOAD LG WF-DS1100 Service Manual ↓ Size: 9.32 MB | Pages: 60 in PDF or view online for FREE

* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by

8minutes at maximum and decreased by 4 minutes at maximum.

* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically

adds rinsing, and the remaining time may be increased.

* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to

the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.

* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a

liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.

• Time left - During operation, the remaining time

is indicated.

(RESERVATION) - When DELAY START
(RESERVATION)  program is selected, it
indicates the finishing time. (RES.=DELAY)

• Alarm indication -When an error occurs, an error

message appears to indicate the abnormality. 
For example,           indicates that the lid is open.

• Use to set a delayed finishing time.
• The time increases when the button is

pushed.

• The following settings are indicated as

the button is pushed 3  4 

5 

...11  12  14      16 

...46 

48  3 HOUR.

• To cancel delay time, turn the power

switch off.

• Use to adjust the WATER LEVEL as required. The

appropriate amount of Detergent is shown next to the
WATER LEVEL in the WATER-DETERGENT diagram

• WATER LEVEL is automatically selected for FUZZY

(normal) program.
The following settings are indicated as the button is pushed  
LARGE         LARGE . EX-LARGE        EX-LARGE
SMALL        SMALL MEDIUM        MEDIUM
MEDIUM LARGE        LARGE

• This button allows you to select the

strength of the water current.

• Power option selections light up in

sequence as follows  NORMAL 
STRONG 

GENTLE 

NORMAL

as the button is pushed. This can be
selected for any program, but when
washing jeans, it starts with Strong. 

• Adjustment can be made while

washing. 

• Use when wash, rinse, spin time

need to be adjusted.

• The time increases when the
button is pressed . 
• If adjustments are needed during

the wash, press the [start/pause]
button before making any changes. 

• When the button is  pressed during

washing, the remaining time is
displayed. 

• Use to select Water

Temperature. 
Pressing the button allows
you to select  COLD
WARM (HOT&COLD)
HOT      COLD
respectively.  
Default setting is COLD.

* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use 

TUB CLEAN course to clean the tub.  (refer to page 23)

* Even if the water level or the water temperature are changed by the user in FUZZY(Normal) Program, 

the sensor will still work. The sensor algorithm may differ according to models.

* The control panel may differ according to different models.

• Use to lock or unlock the control

buttons to prevent settings from
being changed by a child.
To lock, push the RINSE and
SPIN buttons simultaneously and
to unlock push them one more
time during the washing process.

• It only operates in FUZZY Program.
• During being detected by the sensor, the LED flashes green, orange 

and red in turn. And, after detecting, the LED lights a specific color according to the detecting condition as
follows:  

If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.) is determined as
better than the standard one, it optimizes the algorithm to save the energy by decreasing washing time/strength,
and the LED automatically turns to red.  
If the current washing condition is determined as worse than the standard one, it optimizes the algorithm by
increasing washing time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one, the algorithm has no change and the
LED turns to green.

• Use to start or pause the

washing process.

• Repeats start and pause by

pushing the button.

• Use to turn the power on or off.
• Push again and power goes on or off
• The power goes off automatically about

10 seconds after the wash is finished.

• Use for selecting wash program.
• This button allows you to  select 8

different  programs for  different kinds  of
laundry and dirtiness.

• program selections light up in sequence as

follows: FUZZY (NORMAL)
DELICATE       ECONOMY      JEAN
WOOL       SILENT       FAVORITE
TUB CLEAN      FUZZY (NORMAL)
etc. Select the desired program by
pressing the button.

Used for normal loads, this mode
automatically selects the most
appropriate conditions and
completes the sequence in one
operation. The built-in sensor
detects the size of the load and
the ideal wash power and wash,
rinse and spin times are set
accordingly.

Use this mode when washing
lightly soiled clothes for a short
time. The highly recommended
laundry amount is under 2.0kg.

Use Jean program when washing
Jeans of different sizes

Use this program to wash items
requiring a GENTLE WASH action. 
This would include blouses,
nylons and dress shirts with light
soiled.  The highly recommended
laundry amount is under 2.0kg.

Select the
ECONOMY
program on
the Control
panel.

The pulsator rotates for
15 seconds to detect the
laundry load.
Then the WATER LEVEL
and the amount of
Detergent to be used
will be shown and
water will be supplied.

Select the

JEAN program

on the

Control panel.

Spread

the jean

evenly in

the tub

Select the
WOOL
program on
the Control
panel.

Use this program for washing delicate
fabrics such as lingerie and woolens.
(wash only “water washable” clothes)
Before washing your woolens check the
care label for the washing instructions.
(wash only water washable clothes)

The highly recommended laundry

amount is under 1.5kg.

¡⁄

Select the
DELICATE
program on
the Control
panel.

Add the appropriate
quantity of Detergent as
indicated by the WATER
LEVEL next to 
WATER DETERGENT.
Or follow the Detergent
manufacturer’s
instructions

Add the appropriate

quantity of Detergent as

indicated by the WATER

LEVEL next to 

Or follow the Detergent

manufacturer’s

instructions

Water will be
supplied for 2
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed.

When the wash
program ends, the
buzzer will ring
for 10 seconds
before the Power
goes off
automatically.

If water is already in the tub, or putting
wet laundry into the tub before starting
will increase the WATER LEVEL.
With lightweight bulky loads, WATER
LEVEL can be set low. 
Changes to Water Temperature
(HOT/COLD) and wash level are
possible during operation.  

When setting the WATER LEVEL
manually, do not set to Medium to
prevent damage to laundry.
Washing with HOT water may damage
the laundry (Water is set to cold
automatically). Ensure that the load is
under 1.5kg.

In order to avoid  damage to laundry, 
the spin cycle may appear slow.
This also avoids wrinkles and clothing
may still contain some water. This is
normal.

Use neutral Detergent
appropriate for the
laundry.
When washing woolens
use a mild Detergent
recommend- ed for
washing wool.

¡⁄

Before starting to wash, make sure that
the laundry is washable.
Washing with HOT water may damage
the laundry (Water is set to COLD
automatically).