DOWNLOAD LG WF-C9211T Service Manual ↓ Size: 7.31 MB | Pages: 62 in PDF or view online for FREE

Remove back cover fixing screws then disassemble
the back cover.

Disconnect the leads and the drain hose-p from the
drain pump.

Remove the pump fixing screws then
disassemble the drain pump.

Fall down the washer for clutch & motor removal.

Remove the belt.

Disassemble the clutch.

Remove two motor fixing screws then
disassemble the motor.

Separate top cover from washing machine.

As in the fig, lift snubber bar and take it out of out
case with out tub.

Damper assembly shall not be disassembled.
Replace damper as assembly.

For assembly, keep the following.(Location & color)

          

A051                NATURAL

A052                     BLUE

Tub cover

Inner tub

Hub fixing nut

Leads

Drain hose-p

Pump fixing screw

• To use the CHECK PROGRAM (QC TEST MODE), press WATER LEVEL, PROCESS and POWER button ON

without depositing any laundry.

• In QC TEST MODE all LEDs are on and press START(PAUSE) button to check over the following items.

1

2

3

4

5

6

7

8

Initial state

Press once

Press twice

Press 3 times

Press 4 times

Press 5 times

Press 6 times

Press 7 times

• WATER LEVEL frequency is

on DISPLAY in the condition of

no water in TUB.

• After detecting laundry amount

the number of pulse is on the

DISPLAY.

• AUTO OFF.

• All LEDS ON.

※64~70 DISPLAY.

• Laundry amount test.

• COLD water.

• HOT water. (option)

• If the LID is opened,            is on the

DISPLAY. In that case, close the LID.

• DRAIN MOTOR is 1st start.

• DRAIN MOTOR is 2nd start. 

Drain pump is on.

• All LEDS OFF.

Many washing problems involve poor soil & stain removal, residues of lint and scum, and fabric damage. For
satisfactory washing results, follow these instructions.

• Use correct amount of Detergent for load size, amount of soil

and water Hardness.

• Use WARM or HOT water for normal soil.

Different Water Temperature may be required according to soil
type. 

• Reduce load size.
• Wash with JEAN or Soak(SPEEDY SOAK) & JEAN wash cycle

for heavy soiled laundry.

• Separate heavily soiled items from lightly soiled ones.
• Pretreat stain and heavy soil according to directions shown on

page 11.

• Rub the stain with bar soap. Wash.
• Do not overfill fabric softener dispenser and do not pour liquid

fabric softener directly onto fabric. 
See page 14 for more instructions.

• Keep the recommendations against Scrud(waxy buildup). (refer

to scrud page14.)

• Use correct amount of Detergent for load size, amount of soil

and water Hardness.

• To restore discolored load of whites, use rust remover safe for

fabric.

• Install nonprecipitating water softener or an iron filter in your

water supply system for an ongoing problem.

• Before washing, run water for a few minutes to clear lines.

• Wash lint givers eg towels, flannelette sheets, separately from lint

collectors eg synthetic fabrics and remove tissues in pockets
before wash. See page 11 for sorting and caring before loading.

• Do not overload the washer

• Do not overload the washer.
• Some Detergents need to be pre-dissolved, check the Detergent

instructions. Try pre-dissolving the Detergent.

• Increase Water Temperature using HOT water safe for fabric.
• Use proper amount of Detergent.

• Never pour chlorine bleach directly on fabric. 

See page 13 for adding liquid bleach.

• Fasten zippers, hooks, and buckles.
• Remove objects in pockets. See page 11 for caring before

loading.

• Do not overload the washer.

Poor soil
removal

• Not enough Detergent
• Wash Water Temperature

too low.

• Overloading the washer
• Incorrect wash cycle
• Incorrect sorting
• Do not pretreat stain

• Undiluted fabric softener

dispensed directly onto
fabric

• A buildup caused by the

interaction of fabric softener
and Detergent can flake off
and mark clothes

• Not enough Detergent

• Iron or manganese in

water supply, water pipes,
or water heater

• Incorrect sorting
• Tissues left in pocket
• Overloading the washer

• Overloading the washer
• Undissolved Detergent
• Use too much Detergent

• Incorrect use of chlorine

bleach.

• Unfastened zippers,

hooks, buckles

• Ribs, tears and broken

threads

• Overloading the washer
• Degradation of fabric

Blue Stains

Holes, tears,
or snags

Black or gray
marks on
clothes

Yellow or
brown rust
stains

Lint

Residue or
Detergent

▶ For more detailed information for trouble shooting refer to page 46 to 57. 

ERROR DECISION

CAUSE FOR ERROR

BASIS

OCCURRENCE

REMEDY

ERROR

• WATER LEVEL

does not rise to the

set level in 40

minutes.

• Water is not

completely drained

in 10 minutes.

• Laundry unbalance

during spin.

• In the second QC

Mode the following

message is displayed.

WATER

SUPPLY

& INLET

V/V.

DRAINAGE

UNBALANCE

OVER

FLOODING

ERROR

• Water faucet is closed?

• Water supply is interrupted.

• Inlet V/V is clogged with dirts.

• Connector has bad contact to

the inlet valve.

• Yellow(YL) 2 pin connector has

bad contact to the P.W.B ASM.

• Is the drain hose located

properly?

• Drain hose is not lowered.

• Drain hose is folded or clogged

due to freeze or dirts.

• Bad Drain Motor part or

WHITE(WH) 2 pin connector to

the P.W.B ASM has bad

connection.

• Laundry in the INNER TUB is

filled unevenly.

• Washer is tilted.

• S.F S/W is too closed to the

washing tub, or has bad contact.

• Is the CONNECTOR of Ball

pressure sensor disconnected

or badly tonched?

• Check INLET valve

• Open water faucet.

• Wait until water supply is

resumed.

• Clean or replace filter.

• Correct the connector contact.

• Same as above.

• Hung up drain hose at 0.9~1.3m

high. (For pump)

• Put the hose lower.

(For : Non-pump)

• Unclog the drain hose.

• Replace Drain Motor or correct

the connector contact.

• Try to fill laundry uniformly in the

inner tub.

• Adjust the leg.

• Check and replace S.F S/W.

• Check B.P SENSOR

CONNECTOR  or replace B.P

sensor