DOWNLOAD LG WDN12515BD Service Manual ↓ Size: 3.57 MB | Pages: 37 in PDF or view online for FREE

1⃞ Before servicing, ask the customer what the trouble is.
2⃞ Check the setup (power supply is 120 V AC, remove the transit bolts....).
3⃞ Check with the troubleshooting guide.
4⃞ Plan your service method by referring to the disassembly  instructions.
5⃞ Service the unit.
6⃞ After servicing, operate the appliance to see whether it functions correctly.

■ STANDARD INSTALLATION

The appliance should be installed as follows:

Remove the 4 shipping bolts

Turn the leveling feet to adjust 

with the supplied wrench. 

the appliance.

※ Do first lower side to remove easily.

Keep the shipping bolts and  

spanner for future use.

Insert the 4 caps 

(provided) into the hole.

Turn clockwise to raise; 

counterclockwise to lower. 

4. INSTALLATION & TEST

■ HOW TO CONNECT THE INLET HOSE

Verify that the rubber washer is inside of the

valve connector.

Tighten the inlet hose securely to prevent leaks.

■ CONNECT THE DRAIN HOSE

■ CONNECT POWER PLUG

※ The end of the drain hose should be placed less than 96” from the floor.

· Connect the power plug to the wall outlet.

· Avoid connecting several electric devices, as

doing so may cause a fire.

· Make sure that the hose is not twisted.

· Avoid submerging the end of the hose.

SOFTENER

MAX

TEST OPERATION

Connect the power plug to
the outlet.
Connect the inlet hoses. 

Power off and the power on.
Press the SPIN SPEED button.
Press the START/PAUSE  button.
Check the spin and drain
functions.

Listen for a click to determine
if the door is unlocking.

Listen for a click to determine if
the door has locked.

If SVC is needed during check,
remove the remaining water by
pulling out the hose cap.

Preparation for 

Press the POWER button.

Press the Start/Pause

washing.

button.

Press the WASH/RINSE button 

Check if the drum rotates  

Check if water is supplied

and  the present temperature will 

clockwise and  counterclockwise.  

through the detergent dispenser.

be displayed.

Check the water  

Check the automatic 

Check the water supply.

temperature.

reverse rotation. 

Check the drain and spin 

Press the 

Water removal 

functions.

START/PAUSE button.

5. OPERATION

 EST. TIME REMAINING

• This display shows:
  a) the estimated time remaining
      in the cycle when operation.
  b) an error code when an error
      has been detected.

CYCLE SELECTOR

• Press the Cycle selector to
  select cycle designed for 
  different types of fabric and
  soil levels.

START/PAUSE button

• Use this button to start/stop the 
   washer.

 WASH,RINSE temp., SPIN SPEED, SOIL LEVEL button  

• Select a water temperature based on the type of load you are washing.
• To change the spin speed, press the Spin Speed button repeatedly 
   to cycle through available options.
• To change the soil level, press the Soil Level button repeatedly until 
   the desired setting is on.

OPTION button

• Prewash : Use this option for
   loads that need pretreatment. 
   It adds 16 minutes prewash and drain. 

POWER button

• Use this button to turn 
   power On/Off.

• Quick Cycle : The Quick offers a quick 
   cycle time.

• Rinse+Spin : Use this option to rinse 
   and then spin.

BEEPER, DELAY WASH, EXTRA RINSE button

• Use the Beeper button to turn the Beeper On/Off.
• Delay Wash allows the start of any cycle to be delayed for 1~9 
   hours. 
• Extra Rinse provides an additional rinse.

DOOR LOCKED lamp

• Light whenever the door of the washer is locked.
• The door can be unlocked by pressing the Start/Pause   
   button to stop the washer.