DOWNLOAD LG WD14060D6 Service Manual ↓ Size: 17.55 MB | Pages: 67 in PDF or view online for FREE

If you press the Start/Pause button in error condition, any error except 

will disappear and the

machine will change into the pause status.
In case of 

, 

, if the error is not resolved within 20 sec., and in case of other errors, 

if the error is not resolved within 4 min., power will be turned off automatically and the error only will be
blinked. But in the case of 

, power will not be turned off.

7-6. ERROR DISPLAY

WATER 

I

NLET

E

RROR

• Not reached the water level(246) within 8 minutes

after water supplied or not reached to the preset

water level within 25 minutes. 

Page 24

U

NBALANCE

E

RROR

• The appliance is tilted.

• Laundry is gatherd to one side. 

Page 25

WATER 

O

UTLET

E

RROR

• Not fully drained within 10 minutes.

Page 26

OVER

F

LOW

E

RROR

• Water is over flowing (over level 8).

If "         " is displayed, the drain pump operates 

to drain the water automatically.

Page 28

P

RESSURE SENSOR

S/W 

E

RROR

• The sensor pressure switch is out of order.

Page 29

D

OOR OPEN 

E

RROR

• In case of operating the reservation function or the

other function with door opened. Close the door,

then the error display is resolved.

• The door switch is out of order.

Page 30

T

HERMISTOR(HEATING)

E

RROR

• The THERMISTOR is out of order.

Page 31

MOTOR 

L

OCKED

E

RROR

• The connector in the LEAD WIRE ASSEMBLY is 

not connected to the connector of STATOR

ASSEMBLY.

Reconnect or repair the connector.

• The hall sensor is out of order/defective.

Replace the STATOR ASSEMBLY

Page 32

• Water leaks

P

OWER 

F

AILURE

W

A

TER 

L

E

AKAGE

• The washer experienced a power failure

Press the start/pause button

7-7. TROUBLESHOOTING WITH ERROR CODES

Reconnect or repair the 

.

Or replace the 

.

Is the 

connected correctly to the 

and the 

? Is the 

alright ?

Is the water tap closed?

[Note] Environmental safety check list

1. No water tap leakage or freeze       4. No entanglement of water supply hose.

2. No water shortage.                          5. No water supply hose leakage

3. The inlet filter is not cloggeed. 

Check the 

and  open it fully.

When there is water in the tub,
is the water level frequency
over 26.0khz?

Are the inlet valve filters
clogged?

Check the 

and 

(clogged) 

Check the water level frequency again, 
if it is over 26.2KHz, replace 

There are  filters on the unit’s inlet valves to filter mineral
deposits or other debris from entering the unit.
If it is clogged, water will not flow through these filters. Remove
hoses from unit, remove the filters and clean thoroughly.

 

 

 

Replace the 

.

Replace the 

.

Is the resistance of each lnlet valve within 3.5 ~4.5 kΩ ?

When the washing machine is started, is the inlet valve
operating?

Pre Valve

Steam Valve

Main Valve

1

2

1

2

3

3

Does the load lean toward one

side, or is the load a few items?

Is the washing machine installed

at an angle?

Adjust the height of washing

machine to be kept horizontally. 

( Page 7)

Is the laundry mixed?

The few items of clothing will clump together 

and their weight will be in one place on the drum,

throwing the weight off during spin mode.

Try rearranging the laundry in drum 

Or the laundry is separated by size, type, and color.

Separate by size, 

type and color