LG WD-S17DVD Service Manual ▷ View online
MAIN PWB ASSEMBLY
③ Disconnect the connectors.
33
① Disconnect the POWER connector and SENSOR
SWITCH ASSEMBLY.
② Remove the Protect Cover.
④ Unscrew 1 screw on the back.
⑤ Disassemble the Main PWB.
34
DISPENSER ASSEMBLY
NOISE FILTER
⑤ Disassemble the 5 connentors from the valves.
④ Unscrew the nut at the lower part of the dispenser.
⑥ Unscrew 2 or 4 screws from the back of the cabinet.
※Wire Color
① Red Housing (BK-BL)
② White Housing (BK-WH)
③ Red Housing (BK-VT)
④ Blue Housing (BK-BL)
⑤ Blue Housing (BK-GY)
① Red Housing (BK-BL)
② White Housing (BK-WH)
③ Red Housing (BK-VT)
④ Blue Housing (BK-BL)
⑤ Blue Housing (BK-GY)
① Unscrew a screw from the TOP BRACKET.
② Disassemble two connectors.
① Disassemble the top plate assembly.
② Pull out the drawer.
③ Push out the DISPENSER ASSEMBLY after
unscrew 2 screws.
35
CABINET COVER
④ Unscrew the screw from the lower side of the cabinet
cover.
③ Put a flat ( - ) screwdriver or putty knife into the both
sides of the filter cover, and pull it out.
① Unscrew the 6 screws from upper of the canbinet
cover.
② Unscrew the screw from filter cover.
36
⑨ Lift and separate the cabinet cover.
※ NOTE: When assembling the CABINET
COVER, connect the connector.
⑤ Open the door.
⑥ Disassemble the clamp assembly.
⑦ Tilt the cabinet cover.
⑧ Disconnect the door switch connector.
⑩ Disassemble the clamp assembly.
⑪ Disassemble the Gasket.
Click on the first or last page to see other WD-S17DVD service manuals if exist.