LG WD-S17DVD Service Manual ▷ View online
13
Wash, Rinse, Spin, Temp.
• By pressing the Wash button, the Wash type can be selected.
• By pressing the Rinse button, the Rinse type can be selected.
• By pressing the Spin button, the spin speed can be chosen.
• By pressing the Temp. button, the water temperature can be selected.
• By pressing the Rinse button, the Rinse type can be selected.
• By pressing the Spin button, the spin speed can be chosen.
• By pressing the Temp. button, the water temperature can be selected.
Option Button
• Eco : For special cycle to save water for dry.
• Time Dry : For setting the dry time.
• More : For washable nappies select.
• Normal : For Cottons select.
• Iron : If you want to iron clothes.
• Time Dry : For setting the dry time.
• More : For washable nappies select.
• Normal : For Cottons select.
• Iron : If you want to iron clothes.
14
Be careful of electric shock or disconnecting the parts while trouble shooting.
The voltage of each terminal is 220-240V AC and DC when the unit is plugged in.
The voltage of each terminal is 220-240V AC and DC when the unit is plugged in.
7. TROUBLE SHOOTING
7-1.BEFORE SVC SERVICE
7-2. QC TEST MODE.
1. Press the RINSE and SPIN buttons simultaneously.
2. Press the Power button, while the above condition. Then buzzer will sound twice.
3. Press the Start/Pause button repeatedly to cycle through the test modes.
2. Press the Power button, while the above condition. Then buzzer will sound twice.
3. Press the Start/Pause button repeatedly to cycle through the test modes.
The washer must be empty and the controls must be in the off state.
The digits indicate the water level frequency ( x.1 kHz ).
So, for example a display indicating 241: a Water level frequency of 241 x.1 kHz
= 24.1 kHz
✽ Press the Spin and Rinse button simultaneously.
7-3.HOW TO CHECK THE WATER LEVEL FREQUENCY
none
1 time
2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
12 times
13 times
14 times
15 times
16 times
Turns on all lamps and locks the door.
Dry heater turns on
Tumble clockwise
Low speed Spin
High speed Spin
Inlet valve for prewash turns on.
Inlet valve for main wash turns on.
Inlet valve for hot water turns on.
Inlet valve for steam turns on.
Inlet valve for dry water turns on.
Tumble counterclockwise
Wash heater turns on for 3 sec.
Circulation pump turns on.
Drain pump turns on
Water level Sensor for steam
Steam Heater turns on
Power off and unlock the door.
water temperature
rpm (42~50)
rpm (55~65)
rpm (110~120)
Water level frequency (25~65)
Water level frequency (25~65)
Water level frequency (25~65)
Water level frequency (25~65)
Water level frequency (25~65)
rpm (42~50)
Water temperature
Water level frequency (25~65)
Water level frequency (25~65)
Water level frequency of TSG (0~255)
TSG temperature
Turn off all lamps.
number
Check out
Display Status
15
If you press the START/PAUSE button when an error is displayed, any error except
will
disappear and the machine will go into the pause status.
In case of
In case of
if the error is not resolved within 20 sec., or the in case of other
errors, if the error is not resolved within 4 min., power will be turned off automatically and the error code
will blink. But in the case of
will blink. But in the case of
, power will not be turned off.
7-4.ERROR DISPLAY.
E
S
U
A
C
M
O
T
P
M
Y
S
R
O
R
R
E
WATER INLET
ERROR
• Correct water level (246) is not reached within 8 minutes
after water is supplied or it does not reach the preset water
level within 25 minutes.
level within 25 minutes.
1
DOOR OPEN
ERROR
• Door not all the way closed.
• Loose electrical connections at Door switch and
• Loose electrical connections at Door switch and
PWB Assembly.
• The DOOR SWITCH ASSEMBLY is out of order.
2
IMBALANCE
ERROR
• The load is too small.
• The appliance is tilted.
• Laundry is gathered to one side.
• Non distributable things are put into the drum.
• The appliance is tilted.
• Laundry is gathered to one side.
• Non distributable things are put into the drum.
3
DRAIN
ERROR
• Water is over flowing(over 8 level).
If is displayed, drain pump operates to
drain water automatically.
4
OVER FLOW
ERROR
• The sensor pressure switch is out of order.
5
PRESSURE
SENSOR
ERROR
• The SENSOR SWITCH ASSEMBLY is out of order.
6
HEATING
ERROR
• The THERMISTOR is out order.
7
16
ERROR
SYMPTOM
CAUSE
OVER
CURRENT
ERROR
• MAIN PWB ASSEMBLY is out of order.
• Winding in the STATOR ASSEMBLY is short-circuited.
• Winding in the STATOR ASSEMBLY is short-circuited.
• The Dry Heater is out of order
Replace the Dry Heater
• The Connector of the Dry Heater is not connected properly to the
connector in the Main PWB ASSEMBLY
Reconnect or repair the connector
• The Dry fan motor is out of order
Replace the fan Motor.
8
• The connector (3-pin, male, white) in the MOTOR
HARNESS is not connected to the connector
(3-pin, female, white) of STATOR ASSEMBLY.
(3-pin, female, white) of STATOR ASSEMBLY.
• The electric contact between the connectors
(3-pin, male, white) in the MOTOR HARNESS
and 4-pin, female, white connector in the MAIN PWB
ASSEMBLY is bad or unstable.
and 4-pin, female, white connector in the MAIN PWB
ASSEMBLY is bad or unstable.
• The MOTOR HARNESS between the STATOR
ASSEMBLY and MAIN PWB ASSEMBLY is cut (open
circuited).
circuited).
• The hall sensor is out of order/defective.
9
10
LOCKED
MOTOR
ERROR
DRY
HEATER
ERROR
Click on the first or last page to see other WD-S17DVD service manuals if exist.