LG WD-80160FU Service Manual ▷ View online
HOW TO CONNECT INLET HOSE
Check that the rubber washer is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
CONNECT DRAIN HOSE
CONNECT POWER PLUG
8
Make sure that the hose is not twisted.
The drain hose should be placed under 100cm from the floor.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices,
It may be the cause of a fire.
Avoid submerging the end of the hose.
TEST OPERATION
9
Connect the power plug to
In case of cotton program.
the outlet.
Connect the inlet hose.
Preparation for
Press the power button.
Press the START/PAUSE
washing.
button.
Check if the drum rotates
Check if water is supplied
clockwise and counterclockwise.
through the detergent dispenser.
Power off and then power on.
Check if the door can be
opened after 2 minutes.
Check if the door can be
opened after 2 minutes.
Press the Start/Pause button
after selecting Pump button by
pressing Program button.
after selecting Pump button by
pressing Program button.
If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Check the water heating.
Check automatic reverse
Check the water supply.
turn.
Check drain and spin
Power off and open the
Water removal
door
10
5. OPERATION
Drain
Time Delay
Press the button when delayed washing is
needed.
When the button is pressed, [ ] is
displayed,
maximum delay of [ ] hours can be set.
Each press advances time delay by the hour.
Use [Power] button to cancel [Time Delay]
[Time Delay] means the time required from the
present to the completion of washing.
needed.
When the button is pressed, [ ] is
displayed,
maximum delay of [ ] hours can be set.
Each press advances time delay by the hour.
Use [Power] button to cancel [Time Delay]
[Time Delay] means the time required from the
present to the completion of washing.
Start/Pause button
Use the button to start or pause wash
cycle.
The power turn off automatically 4 minutes
after the pause button is pressed.
cycle.
The power turn off automatically 4 minutes
after the pause button is pressed.
Wash program selector
8 programs can be set depending on the type
of the laundry.
By pressing the button
[Cotton ➔ Synthetic ➔ Delicate ➔ Wool ➔
Hand Wash ➔ Quick 30 ➔ Rinse+Spin ➔
Drain]
can be selected.
of the laundry.
By pressing the button
[Cotton ➔ Synthetic ➔ Delicate ➔ Wool ➔
Hand Wash ➔ Quick 30 ➔ Rinse+Spin ➔
Drain]
can be selected.
Option
Pre Wash
If the laundry is heavily
soiled, “Pre Wash” course is
effective.
soiled, “Pre Wash” course is
effective.
Pre Wash is available in
Cotton and Synthetic
Program.
Cotton and Synthetic
Program.
Time Save
By selecting the Time Save
option, the wash time may
be reduced, depending on
the program selected.
option, the wash time may
be reduced, depending on
the program selected.
Power button
Press the button to turn
on and off.
on and off.
11
Drain
LED display
Display the estimated remaining time
(Hour : Minute) to finish.
In case of abnormal operation, error
indications are displayed.
( )
See troubleshooting guide.
indications are displayed.
( )
See troubleshooting guide.
Option
Rinse+ : If you wish to rinse more, the
Rinse+ option will remove any trace of
detergents.
Rinse+ option will remove any trace of
detergents.
Crease Care : If you want to prevent
crease, select this function after selecting
spin speed.
crease, select this function after selecting
spin speed.
Spin
WD(M)-10160(5)F
No Spin ➔ Rinse Hold ➔
400 ➔ 800 ➔ 1000
400 ➔ 800 ➔ 1000
WD(M)-80160F
/WD-8016F
No Spin ➔ Rinse Hold ➔
400 ➔ 600 ➔ 800
400 ➔ 600 ➔ 800
WD(M)-65160F
No Spin
No Spin
➔
Rinse Hold
➔
400
➔
500
➔
650
Water temperature
selector
selector
Press the button to select
water temperature.
The water temperature
water temperature.
The water temperature
[40 C
➔
60 C
➔
95 C
➔
Cold
➔
30 C] can be selected in
Cotton.
95 C is selected for Cotton
only.
only.
Child - lock
Child Lock system can be set and canceled by pressing both
[Temp.] and [Option] button simultaneously for 3 seconds.
Once Child Lock is set, all button are inoperable except
power button.
Child Lock system can be set anytime even during Power-off
and operation.
It is automatically cancelled when an operational error
occurs.
[Temp.] and [Option] button simultaneously for 3 seconds.
Once Child Lock is set, all button are inoperable except
power button.
Child Lock system can be set anytime even during Power-off
and operation.
It is automatically cancelled when an operational error
occurs.
Click on the first or last page to see other WD-80160FU service manuals if exist.