LG WD-16NEB / WD-16NEW Service Manual ▷ View online
32
①
① Open the door.
②
②
② Unscrew the 7 screws from the HINGE COVER.
③
③ Put a flat ( - ) screwdriver into the openng of the hinge,
and pull out the hinge cover.
④
④ Unscrew a screw from the lower side of door.
⑤
⑤
⑤ Disassemble the door upward.
DOOR
①
① Open the door and disassemble the CLAMP
ASSEMBLY.
②
② Unscrew the 2 screws.
DOOR LOCK SWITCH ASSEMBLY
※
※ Be careful! The door is heavy.
※
※ NOTE
• Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
33
PUMP
HEATER
THERMISTOR
①
①
Disassemble the cabinet cover.
②
②
Separate the pump hose, and the bellows.
③
③
Disassemble the pump assembly in arrow
direction.
①
①
Disassemble the cabinet cover.
②
②
Separate 2 connectors from the heater.
③
③
Loosen the nut and pull out the heater.
①
①
Disassemble the cabinet cover.
②
②
Unplug the white connector from the thermistor.
③
③
Pull it out by holding the bracket of the
thermistor.
※
※ CAUTION
• When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
the tub.
• Tighten the fastening nut so the heater is
secure.
* WM2455H*
only
only
34
34
MOTOR/DAMPER
①
①
Disassemble the back cover.
②
②
Remove the bolt.
③
③
Pull out the Rotor.
①
①
Unscrew the 2 screws from the tub bracket.
②
②
Remove the 6 bolts on the stator.
③
③
Unplug the 2 connectors from the stator.
①
①
Disassemble the damper hinges from the tub
and base.
②
②
Separate the dampers.
※
※ NOTE
• Once removed, replace the damper with
new one.
35
10-1. CABINET & CONTROL PANEL ASSEMBLY
10. EXPLODED VIEW
A450
A485
A455
A410
A152
A111
A110
A150
A154
A141
A140
A310
A303
A300
A200
A155
A440
A430
A100
A101
A133
A130
A151
A153
A131
A201
A220
F110
F215
F210
A105
A106
A104
A102
A103
A175
Click on the first or last page to see other WD-16NEB / WD-16NEW service manuals if exist.