LG WD-1485AD5 Service Manual ▷ View online
13
6. WIRING DIAGRAM / PCB L
AYOUT / PROGRA
M CHA R T
V ~ U / U ~ W / W ~ V
Drain Pump
Pressure Switch
&
Thermistor
&
Measure Hz impossible
Here.
Just Check cut-off.
R : 8 ~11Ω
Ω)
PCB Power
Pressure Switch
Common :
Thermistor
Common
LED Display
Pump & Valve
Auto Door & Valve
Wash Heater
W
U
V
Ha
(5~15 k
Hb
(5~15 kΩ)
Auto Door
Main Valve
Pre Valve
Circulation
Pump
Common
Fan motor control
Dry Heater
U
V
W
U
V
W
14
15
Before servicing ask the customer what the trouble is.
Check the adjustments. (Power supply :220-240V~, Removal of transit bolts etc..)
Check the troubles referring to the troubleshooting.
Decide service steps referring to disassembly instructions.
Then, service and repair.
After servicing, operate the appliance to see whether it works OK or NOT.
Check the adjustments. (Power supply :220-240V~, Removal of transit bolts etc..)
Check the troubles referring to the troubleshooting.
Decide service steps referring to disassembly instructions.
Then, service and repair.
After servicing, operate the appliance to see whether it works OK or NOT.
7. TROUBLESHOOTING
7-1. BEFORE SVC CHECKING
7-2. LOAD TEST MODE
1 Press and Hold ‘
Option1
’&‘
Rinse
’ buttons
and then press ‘
Power
’ button.
2 The washer must be empty and the controls must be in the off state.
3 Press Power with above two buttons pressed and then buzzer will sound.
4 Press the Start/Pause button repeatedly to cycle through the test modes
3 Press Power with above two buttons pressed and then buzzer will sound.
4 Press the Start/Pause button repeatedly to cycle through the test modes
1
2
3
4
2
3
4
5
6
6
None
1 time
2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
11 times
Turns on all lamps and locks the door.
Tumble clockwise.
Low speed Spin.
High speed Spin.
Inlet valve for prewash turns on.
Inlet valve for main wash turns on.
Inlet valve for hot water turns on.
High speed Spin.
Inlet valve for prewash turns on.
Inlet valve for main wash turns on.
Inlet valve for hot water turns on.
Tumble counterclockwise.
Heater turns on for 3 sec.
Circulation pump turns on.
Drain pump turns on
Dry Fan / Dry Heater turn on.
Heater turns on for 3 sec.
Circulation pump turns on.
Drain pump turns on
Dry Fan / Dry Heater turn on.
rpm (42~50)
rpm (55~65)
rpm (130~140)
Water level frequency (229~255)
Water level frequency (229~255)
Water level frequency (229~255)
rpm (55~65)
rpm (130~140)
Water level frequency (229~255)
Water level frequency (229~255)
Water level frequency (229~255)
rpm (42~50)
Water temperature
Water level frequency (229~255)
Water level frequency (229~255)
Water temperature
Water level frequency (229~255)
Water level frequency (229~255)
12 times
OFF
Smart Buzzer Ring
Dry Fan 6min. / Dry Heater 5min.
Number of times the
Start/Pause button is pressed
Check Point
Display Status
16
7-3. HOW TO CHECK THE WATER LEVEL FREQUENCY
7-4. HOW TO KNOW TO TEMPERATURE OF EACH THERMISTOR
AT OPERATING CONDITION.
The digits means water level frequency.(10
-1
kHz)
ex) 241 : Water level frequency = 241 x 10
-1
kHz
24.1 kHz
Press the
Pre wash
and
Option1
button simultaneously.
Press the
Temp.
and
Option1
button simultaneously.
Thermistor in tub temperature.
Click on the first or last page to see other WD-1485AD5 service manuals if exist.