DOWNLOAD LG WD-14350FD / WD-14351FD Service Manual ↓ Size: 2.71 MB | Pages: 35 in PDF or view online for FREE

HOW TO CONNECT INLET HOSE

Check that the rubber washer is inside of the

valve connector.

Connect the inlet hose firmly to prevent leak.

CONNECT DRAIN HOSE

CONNECT POWER PLUG

Make sure that the hose is not twisted.

The drain hose should be placed under 100cm from the floor.

Connect the power plug to the wall outlet.

Avoid connecting several electric devices, 

It may be the cause of a fire.

Avoid submerging the end of the hose.

TEST OPERATION

Connect the power plug to

the outlet.

In case of coloureds program.       

Connect the inlet hose.   

Preparation 

Press the power button.

Press the Start/Pause

for washing.

button.

Check if the drum rotates  

Check if water is supplied

clockwise and  counterclockwise.  

through the detergent dispenser

Power off and then power on.
Check if the door can be 
opened after 3 minutes.

Turn off Wash and Rinse after 
pressing the Start/Pause button

and start the machine again.

Check drain and spin.

If SVC is needed during 

check, remove

the remaining water by pulling 

out the hose cap.

Check the water heating.

Check automatic reverse

Check the water supply.

turn.

Check drain and spin 

Power off and open the 

Water removal 

door

Press both Time Delay and
Rinse Hold buttons
simultaneously and the present
temperature will  be displayed.

5. OPERATION 

Display the estimated remaining time

(Hour : Minute) to finish.

In case of abnormal operation, error
indications are displayed.  

(                                              )

See troubleshooting guide.

Press the button to select water
temperature.
95 C  is selected for Cotton and
Baby Care only.
By pressing the button while
operating the washer, the present
temperature is displayed.

8 program can be set depending on the type of the laundry.
If the power button is pressed, Cotton program is automatically
set.
By turning the dial, [Cotton–Delicate–Quick 30 –Rinse+Spin–
Spin–Hand Wash/Wool–Synthetic–Baby Care]can be selected.
(The opposite is possible)

Use the button to start or
pause wash cycle.
The power turns off
automatically 4 minutes
after the pause button is
pressed.

• If the laundry is heavily soiled

“Intensive” option is effective.

• By selecting the Intensive

option, the wash time may be
extended, depending on the
program selected.

• This option is not available

with Quick 30 program

• For additional rinse

which may assist in
removing traces of
detergent residue.

• By selecting Rinse+

function, the rinse time
and the rinse water are
increased.

By turning the Spin
dial the spin speed
can be chosen.

, , , , , , , , ,

• If the laundry is heavily soiled, 

“Pre Wash” course is effective.

• Pre Wash is available in Cotton, Synthetic

and Baby Care.

• For high effectiveness or more purity in rinse

operation you can choose Medic care Rinse
option. 

Press the button to turn power on
and off.
Press the button to cancel the delay
finish.

Child Lock system can be set and
canceled by pressing and holding
both [Rinse+] and [Pre Wash] buttons
simultaneously more than 2 seconds.
Once Child Lock is set, all buttons
are inoperable except power button.
Child Lock system can be set
anytime even during Power-off and
operation.
It is automatically cancelled when an
operational error occur.

Press the button when delayed washing is
needed.
When the button is pressed,          is displayed, 
maximum delay of           hours can be set.
Each press advances time delay by the hour.
Use [Power] button to cancel [Time Delay]
[Time Delay] means the time required from the
present to the completion of washing.