DOWNLOAD LG WD-14317RD Service Manual ↓ Size: 5.98 MB | Pages: 42 in PDF or view online for FREE

(1)

Check the S.PRESSURE SWITCH
ASSEMBLY or HOSE (Pressure). 
If the problem is on the
S.PRESSURE SWITCH
ASSEMBLY or the HOSE, replace
the S.PRESSURE SWITCH
ASSEMBLY or the HOSE.

Normal

Correct the connector.

Replace the STATOR
ASSEMBLY

Check on the spinning, is the frequency of the
water level 248 or more. The frequency can be 
checked by pressing the Wash and Rinse buttons at
the same time on the program.

When pressing Rinse, Spin and POWER buttons at
the same time after power off, press the  Start/Pause
button 1 times, is the drum low speed spin?

Is it disconnected, or disassembled?
[Red:3pin(1), GY:4pin(2)]

Check the motor connector, is the resistance of

the terminal same as the figure?

Resistance of terminal: 

①~② / ②~③ / ③~① : About 5Ω~15Ω

Replace the MAIN PWB ASSEMBLY

①

① ②

② ③

③

Does the spring of Latch Hook actuate?

Is there clicking sound once or twice when the
START/ PAUSE

button is pressed to start the cycle?

Is DOOR SWITCH ASSEMBLY broken?

Replace Door Assembly.

Check the DOOR SWITCH
ASSEMBLY Connector and
MAIN PWB ASSEMBLY
(Red 3 pin, Yellow 4 pin and
white 3 pin connector (1)).

Replace the DOOR
SWITCH ASSEMBLY.

Dry duct

Condensing

duct

Thermistor

Disassemble the cabinet cover and
condensing bellows.
Is there any foreign object in condensing
bellows.

Clean the bellows

Replace the thermistor.
(6322FR2046B)

Disassemble the dry fan assy and dry duct
upper, and clean foreign object in duct and
fan.

~

Black

Yellow

20~30