DOWNLOAD LG WD-14317RD Service Manual ↓ Size: 5.98 MB | Pages: 42 in PDF or view online for FREE

Model
WD-14317RD
Pages
42
Size
5.98 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
wd-14317rd.pdf
Date

LG WD-14317RD Service Manual ▷ View online

32
① The cabinet gasket clamp is released.
② Two screws are unscrewed from the cabinet
cover.
① Pull plat(-) screwdriver or pully knife into the
both sides of filter cover, and pull in out.
① Unscrew the screw from the lower side of the
cabinet cover.
① Unscrew the 2 screw from upper of the cabinet
cover.
GASKET ASSEMBLY
33
① Disassemble the clamp assembly.
① Remove dry gasket clamp by loosening the
screw.
① When reassembling the gasket, put the drain
hole of the gasket downward, then assemble.
Drain Hole
Tub Gasket
Clamp
34
① Remove the back cover.
② After loosening the bolt, Rotor, pull out the
rotor.
① Remove the 6 bolt from the stator.
② Disconnect the 2 connectors.
① Remove the hinges (Damper) at the Tub.
② The Hinge(Damper) at the base is pulled off
pressing on the snaps at the sharp end.
③ The hinge at the base is pulled off.
(To arrow direction)
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
Rotor
Bolt
Friction
Damper
Hinge
(Damper)
(ROTOR ASSEMBLY)
(STATOR ASSEMBLY)
(FRICTION DAMPER)
HOW TO ASSEMBLE THE MOTOR
35
① Remove pump outlet hose.
② Remove tub pump bellows.
③ Remove cap(Remaining Hose).
④ Disconnect the wiring.
⑤ Three screws are unscrewed from the cabinet.
⑥ Remove the pump to arrow direction.
① Loosen the nut.
② Remove washing heater by pulling out.
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub.
① Pull it out by holding the thermistor bracket.
If holding the wire and pulling out it, it may be
broken.
Washing
Heater
Nut
Ring Terminal
PUMP
HEATER
THERMISTOR
CAUTION
Page of 42
Display

Click on the first or last page to see other WD-14317RD service manuals if exist.