LG WD-12590RD Service Manual ▷ View online
29
9. DISASSEMBLY INSTRUCTIONS
DISPLAY PWB ASSEMBLY
TOP PLATE ASSEMBLY
CONTROL PANEL ASSEMBLY
DRAWER
CONTROL PANEL ASSEMBLY
Be sure to unplug the machine out of the outlet before disassembling and repairing the parts.
Unscrew 2 screws on the back of the top plate.
Pull the top plate backward and upward as shown.
Disconnect the Display PWB Assembly connector
from Trans cable.
Pull out the drawer and unscrew 2 screws.
Lift the left side of the Control Panel Assembly and
pull it out.
Unscrew the 9 screws from the Control Panel
Assembly.
Disassemble the Display PWB Assembly.
30
Remove the back cover.
Unscrew 2 screws.
Unscrew 2 screws.
Pull the Main PWB ASSEMBLY as shown.
MAIN PWB ASSEMBLY(MAIN)
3
1
2
4
DRAWER
Disassemble the top plate assembly.
Pull out the drawer.
Push out the DISPENSER ASSEMBLY after
unscrew 2 screws.
Unscrew the nut at the lower part of the dispenser.
Disassemble the 2 or 3 connectors from the valves.
Unscrew 2 or 4 screws from the back of the cabinet.
Wire Color
Blue Housing (BK-GR/WH)
White Housing (BK-WH/BK)
Red Housing (BK-BL/RD)
31
3
1
2
4
Unscrew a screw from the TOP BRACKET.
Disassemble two connectors from the POWER
CORD.
Unscrew the 4 screws from upper of the canbinet
cover.
Unscrew the screw from filter cover.
Put a flat ( - ) screwdriver or putty knife into the both
sides of the filter cover, and pull it out.
Unscrew the screw from the lower side of the cabinet
cover.
CABINET COVER
32
Open the door.
Disassemble the clamp assembly.
Tilt the cabinet cover.
Disconnect the door switch connector.
NOTE: When assembling the CABINET
COVER, connect the connector.
Lift and separate the cabinet cover.
Disassemble the clamp assembly.
Disassemble the Gasket.
Click on the first or last page to see other WD-12590RD service manuals if exist.