DOWNLOAD LG WD-12479RD Service Manual ↓ Size: 6.6 MB | Pages: 44 in PDF or view online for FREE

5. OPERATION

• Rotate the Cycle

selector knob to select
the cycle designed for
different types of fabric
and soil levels.

• Use this button to Start/

Stop the washer.

• Use this button to turn the power 

On/Off.

• This display shows:

a) the estimated time remaining in the

cycle when operating.

b) an error code when an error has been

detected.

• Pre Wash: Use this option for loads that need pretreatment. It adds 16

minutes of prewash and drain.

• Rinse + Spin: Use this option to rinse and then spin.

• Dry Only: When you want dry only, select the this option.

• Less Steam: Use this option to steam wash only a small amount of

laundry.

• Eco Steam: Use this option to steam wash while reducing the

electricity consumption.

• Use this option to prevent unwanted use of the

washer. Press and hold the Wash and Rinse
buttons for 3 seconds to lock/unlock control. 

• When Child lock is set, CHILD LOCK lights

and all buttons are disabled except the Power
button. You can lock the washer while it is
operating.

• To change the Rinse Cycling, press the

Rinse button repeatedly through available
options.

• Select a water temperature based on the

type of load you are washing. 

• To change the spin speed, press the Spin

Speed button repeatedly to cycle through
available options.

• This option features an

upgraded washing
performance with low energy
and water consumption.

• Dry programs selected by

rotating dry knob.

• [Normal – More – 30 – 60 – 90 –

120 – 150 – Low Temp. – Iron]
can be selected.

• Intensive: If the laundry is heavily soild “Intensive” optionis

effective. By selecting the Intensive option,the
wash time may be extended, depending onthe
program selected.

• Favorite:This option allows you to store a customized wash

cycle for future use.

• These lights show which portion

of the cycle the washer is
operating.

• Allows the start of any cycle

to be delayed for 3~19
hours.

7. TROUBLE SHOOTING

7-1.BEFORE SVC CHECKING

■ Be careful of electric shock or disconnecting the parts while trouble shooting.
■ Voltage of each terminal is 220-240V~ and DC while applying an electric current.

7-2.QC TEST MODE.

① Pressing  Rinse, and Temp. button simultaneously.
② Press the Power        button, while the above condition.
③ Press the Start/Pause button as follows.

7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY

✽ Press the Rinse and Temp. button simultaneously.

ex) 241 : Water level frequency = 241× 10

-1

kHz

=24.1 kHz

7-4.HOW TO KNOW TO TEMPERATURE OF EACH THERMISTOR

AT OPERATING CONDITION.

■ Thermistor in tub : Press the [Temp.] button.
■ Thermistor in dry duct : Press the [Turbo Steam] button.

The digits means water level frequency(10

-1

kHz) 

Number of times the

Start/Pause button is pressed

Check Point

Display Status

None

Turns on all lamps and locks the door.

1 time

Tumble clockwise 

rpm (42~50)

2 times

Low speed Spin.

rpm (55~65)

3 times

High speed Spin 

rpm (110~120)

4 times

Inlet valve for prewash turns on.

Water level frequency (25~65)

5 times

Inlet valve for main wash turns on.

Water level frequency (25~65)

6 times

Inlet valve for hot water turns on.

Water level frequency (25~65)

7 times

Inlet valve for steam water turns on.

Water level frequency (25~65)

8 times

Inlet valve for dry water turns on.

Water level frequency (25~65)

9 times

Tumble counterclockwise

rpm (42~50)

10 times

Wash heater turns on for 3 sec.

Water temperature

11 times

Circulation pump turns on.

Water level frequency (25~65)

12 times

Drain pump turns on.

Water level frequency (25~65)

13 times

Dry heater turns on for 3 sec.

Water temperature

14 times

Water level Sensor for Steam

Water level frequency of TSG (0~255)

15 times

Steam Heater turns on for 1,2 sec.

TSG temperature

16 times

Power off and unlock the door.

Turn off all lamps.

7-5.ERROR DISPLAY.

• If you press the Start/Pause button in error condition, any error except ‘

’ will disappear and the

machine will change into pause status.

• In case of 『

』, 『

』, 『

』, if the error is not resolved within 20 sec., and in case of other errors,

if the error is not resolved within 4 min., power will be turned off automatically and the error will remain
blinking. But in case of 『 』

, power will not be turned off.

• Has not reached the water level(246)within 8

minutes after water supplied or not reached the
preset water level within 25 minutes.

• Not fully drained within 10 minutes.

• Water is over flowing(over 8 level).

※ If              is displayed, drain pump operates to

drain water automatically.

• The sensor pressure switch is out of order.

• In case of operating the time delay function or

other functions with door opened. Close the
door, then the error display will be cancelled.

• The door switch is out of order.

• The appliance is tilted.
• Laundry is gatherd to one side.

• The THERMISTOR is out of order.

WATER INLET

ERROR

DRAIN ERROR

OVERFLOW

ERROR

SENSOR PRESSURE

S/W ERROR

DOOR OPEN

ERROR

IMBALANCE

ERROR

HEATING

ERROR