LG WD-12330CDK / WD-12330CDP / WD-12336CDK Service Manual ▷ View online
HOW TO CONNECT INLET HOSE
Check that the rubber packing is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
CONNECT DRAIN HOSE
CONNECT POWER PLUG
8
Make sure that the hose is not twisted.
The drain hose should be placed under 100cm from the floor.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices,
It may be the cause of the fire.
Avoid submerging the end of the hose.
TEST OPERATION
9
Connect the power plug to
the outlet.
In case of Coloreds program.
Connect the inlet hose.
Preparation for
Press the POWER button.
Press the Start/Pause
washing.
button.
Check if the drum rotates
Check if water is supplied
clockwise and counterclockwise.
through the detergent
dispenser.
dispenser.
Press the Time Delay and Rinse
Hold buttons simultaneously and
the present temperature will be
displayed.
Hold buttons simultaneously and
the present temperature will be
displayed.
Power off and then power on.
Check if the door can be
opened after 3 minutes.
Check if the door can be
opened after 3 minutes.
Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
Check drain and spin.
and start the machine again.
Check drain and spin.
If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Check the water heating.
Check automatic reverse
Check the water supply.
turn.
Check drain and spin
Power off and open the
Water removal
door
10
5. OPERATION
LED display
Display the estimated remaining time
(Hour : Minute) to finish.
In case of abnormal operation, error
indications are displayed.
indications are displayed.
( )
See troubleshooting guide.
Water temperature selector
Press the button to select water
temperature.
95 C is selected for Cotton only.
By pressing the button while
operating the washer, the present
temperature is displayed.
temperature.
95 C is selected for Cotton only.
By pressing the button while
operating the washer, the present
temperature is displayed.
Wash program selector
8 program can be set depending on the type of the laundry.
If the power button is pressed, Cotton program is automatically
set.
By turning the dial, [Cotton-Synthetic -Wool/Silk-Hand Wash -
Drain-Rinse+Spin-Quick 30-Delicate ]can be selected.
(The opposite is possible)
If the power button is pressed, Cotton program is automatically
set.
By turning the dial, [Cotton-Synthetic -Wool/Silk-Hand Wash -
Drain-Rinse+Spin-Quick 30-Delicate ]can be selected.
(The opposite is possible)
Start/Pause button
Use the button to start or
pause wash cycle.
The power turns off
automatically 4 minutes
after the pause button is
pressed.
pause wash cycle.
The power turns off
automatically 4 minutes
after the pause button is
pressed.
• If the laundry is heavily
soiled “Intensive” option
is effective.
is effective.
• By selecting the
Intensive option, the
wash time may be
extended, depending on
the program selected.
wash time may be
extended, depending on
the program selected.
• Is selected by pressing the Rinse Hold
button this function leaves clothes in
the machine; suspended in the water
after a rinse without entering into spin.
the machine; suspended in the water
after a rinse without entering into spin.
• To proceed through to a drain or spin,
once the rinse hold function is
completed using to program dial scroll
to the required program. (Spin)
completed using to program dial scroll
to the required program. (Spin)
Intensive
Rinse Hold
, , , , , , , , ,
11
• For additional rinse
which may assist in
removing traces of
detergent residue.
removing traces of
detergent residue.
• By selecting Rinse+
function, the rinse time
and the rinse water are
increased.
and the rinse water are
increased.
• If the laundry is heavily
soiled, “Pre Wash”
course is effective.
course is effective.
• Pre Wash is available in
Cotton and Synthetic.
• If you want Dry, select this button.
• By pressing the botton [Normal – More – Time –
• By pressing the botton [Normal – More – Time –
Low Temp. – Less]
Power button
Press the button to turn
power on and off.
Press the button to
cancel the delay finish.
power on and off.
Press the button to
cancel the delay finish.
Child - Lock
Child Lock system can be set and
canceled by pressing and holding both
[Rinse+] and [Pre Wash] buttons
simultaneously more than 2 seconds.
Once Child Lock is set, all buttons
are inoperable except power button.
Child Lock system can be set
anytime even during Power-off and
operation.
It is automatically cancelled when an
operational error occur.
canceled by pressing and holding both
[Rinse+] and [Pre Wash] buttons
simultaneously more than 2 seconds.
Once Child Lock is set, all buttons
are inoperable except power button.
Child Lock system can be set
anytime even during Power-off and
operation.
It is automatically cancelled when an
operational error occur.
Time Delay
Press the button when delayed washing is
needed.
When the button is pressed, is displayed,
maximum delay of hours can be set.
Each press advances time delay by the hour.
Use [Power] button to cancel [Time Delay]
[Time Delay] means the time required from the
present to the completion of washing.
needed.
When the button is pressed, is displayed,
maximum delay of hours can be set.
Each press advances time delay by the hour.
Use [Power] button to cancel [Time Delay]
[Time Delay] means the time required from the
present to the completion of washing.
Spin button
By pressing the Spin
button the spin speed
can be chosen.
button the spin speed
can be chosen.
Rinse+
Pre Wash
Dry
Click on the first or last page to see other WD-12330CDK / WD-12330CDP / WD-12336CDK service manuals if exist.