LG WD-12330CDK / WD-12330CDP / WD-12336CDK Service Manual ▷ View online
28
9. DISASSEMBLY INSTRUCTIONS
Disassemble and repair the parts after pulling out power cord from the outlet.
CONTROL PANEL
PLATE ASSEMBLY (TOP)
Hook
Control Panel Assembly
Control Panel Assembly
Unscrew 2 screws on the back of the top plate.
Pull the top plate backward and upward as shown.
Disconnect the PWB assembly connector from Main
lead wire assembly.
Pull out the drawer and unscrew 2 screws.
Push upper hooks down on the top and pull the control
panel.
Disconnect the PWB assembly (Main & Display) from
the control panel by unscrewing 7 screws.
29
Unscrew 2 screws on the back of the top plate.
Pull the top plate backward and upward as shown.
Disconnect the ASSEMBLY connector.
Pull out the drawer and unscrew 2 screws.
Push 2 upper hooks down and pull the control panel.
Disconnect the PWB ASSEMBLY from the control
panel by unscrewing 7 screws.
30
① Disassemble the Top Plate Assembly.
② Pull the drawer to arrow direction.
③ Two screws are unscrewed.
① The hose clamps and the hose are
disassembled.
② The ventilation bellows are disassembled on
the tub.
DISPENSER ASSEMBLY
DISPENSER
ASSEMBLY
PUSH
31
① Disconnect the wiring connector.
② Remove the valve by two screws of the valve
holder.
When reconnecting the connector
2
1
3
4
INLET VALVE
VALVE
(DRY)
YL/BK - BK
VALVE
(PRE-WASH)
GY/WH - BK
VALVE
(NORMAL-WASH)
WH/BK - BK
VALVE
(HOT)
BL/RD - BK
① Remove the lower cover to arrow direction
after one screw is unscrewed.
COVER LOWER
① Rotate the Cap(Remaining Hose) to arrow
direction.
② Pull it out from hose.
※ First, prepare a bucket to put in the remained
water.
Cap(Remaining Hose)
Removing method of remained water
Click on the first or last page to see other WD-12330CDK / WD-12330CDP / WD-12336CDK service manuals if exist.