LG WD-12326RD Service Manual ▷ View online
32
9. DISASSEMBLY INSTRUCTIONS
DISPLAY PWB ASSEMBLY
TOP PLATE ASSEMBLY
CONTROL PANEL ASSEMBLY
DRAWER
CONTROL PANEL ASSEMBLY
Be sure to unplug the machine out of the outlet before disassembling and repairing the parts.
Unscrew 2 screws on the back of the top plate.
Pull the top plate backward and upward as shown.
Disconnect the Display PWB Assembly connector
from Trans cable.
Pull out the drawer and unscrew 2 screws.
Lift the left side of the Control Panel Assembly and
pull it out.
Unscrew the 9 screws from the Control Panel
Assembly.
Disassemble the Display PWB Assembly.
33
Disconnect the POWER connector and SENSOR
SWITCH ASSEMBLY.
Remove the Protect Cover.
Disconnect the connectors.
Unscrew 1 screw on the back.
Disassemble the Main PWB.
Remove the back cover.
Unscrew 2 screws.
Pull the MAIN PWB ASSEMBLY as shown.
CONNECTOR
PROTECT COVER
MAIN PWB ASSEMBLY
※
※ WD-10PFD
34
Disassemble the top plate assembly.
Pull out the drawer.
Push out the DISPENSER ASSEMBLY after
unscrew 2 screws.
Unscrew the nut at the lower part of the dispenser.
Disassemble the 4 connectors from the valves.
Unscrew 2 screws from the back of the cabinet.
Unscrew a screw from the TOP BRACKET.
Disassemble two connectors from the POWER
CORD.
Wire Color
Blue Housing (OR-BK)
White Housing (WH-BK)
Blue Housing (GY-BK)
Red Housing (BL-BK)
DISPENSER ASSEMBLY
NOISE FILTER
35
Unscrew the 4 screws from upper of the canbinet
cover.
Unscrew the screw from filter cover.
Put a flat ( - ) screwdriver or putty knife into the both
sides of the filter cover, and pull it out.
Unscrew the screw from the lower side of the cabinet
cover.
CABINET COVER
Click on the first or last page to see other WD-12326RD service manuals if exist.