LG WD-12124RD Service Manual ▷ View online
32
① Open the door completely.
② Remove the two screws from the hinge.
※ When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
the Cabinet Cover.
① Rotate the Cap(Remaining Hose) to arrow
direction.
② Pull it out from hose.
※ First, prepare a bucket to put in the remained
water.
Cap(Remaining Hose)
DOOR
Removing method of remained water
33
① The cabinet gasket clamp is released.
② Two screws are unscrewed from the cabinet
cover.
① One screw is unscrewed from the lower cover.
② The lower cover is disassembled by pulling
out.
③ Three screws are unscrewed from the cabinet.
① The control panel is removed.
② Screw is unscrewed from the cabinet cover.
Cap
(Remaining Hose)
GASKET ASSEMBLY
34
① Remove tub gasket clamp by loosening the
screw.
① Remove dry gasket clamp by loosening the
screw.
① When reassembling the gasket, put the drain
hole of the gasket downward, then assemble.
Dry
Gasket
Clamp
Gasket
Clamp
Tub Gasket
Clamp
Clamp
Drain Hole
35
① Remove the back cover.
② After loosening the bolt, Rotor, pull out the
rotor.
① Remove the 6 bolt from the stator.
② Disconnect the 2 connectors.
① Remove the bolts at the Tub.
② The Hinge(Damper) at the base is pulled off
pressing on the snaps at the sharp end.
③ The hinge at the base is pulled off.
(To arrow direction)
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
Rotor
Bolt
Friction
Damper
Damper
Bolt
Hinge
(Damper)
(ROTOR ASSEMBLY)
(STATOR ASSEMBLY)
(FRICTION DAMPER)
HOW TO ASSEMBLE THE MOTOR
Click on the first or last page to see other WD-12124RD service manuals if exist.