LG TCW2013QS Service Manual ▷ View online
28
Have all the transit bolts and base packing
been removed?
Remove the transit bolts
and Base packing.
Move the washer or
reinforce the floor.
Is the washer installed on a solidly constructed
floor?
Check if the washer is perfectly level as follows:
Check the leveling of the washer with a level
and check that the washer is stable.
Put an unbalance part (rubber) inside of drum
and start QC test mode and run in high spin
When the machine is spinning in high speed,
verify that it is stable.
If it is not stable, adjust feet accordingly. After
the washer is level, tighten the lock nuts up
against of the base of the washer. All lock nuts
must be tightened.
If you do not have the unbalance part, put 4.5 to
6.5 lbs (2 to 3 kg) of clothing.
When the machine is spinning at high speed,
verify that it is stable.
Lock nut
Adjustable feet
Lock nut
Adjustable feet
29
Is water supplied?
Are the plugs correctly connected to the terminals
of the INLET VALVEASSEMBLY?
Is detergent/softener/bleach put in the correct
compartment of the Dispenser?
Is the detergent/softener/bleach CAP clogged?
Refer to page 22
IE ERROR
Check the wiring.
Put it in the correct
compartment
Clean the CAP and
Dispenser
Secure the bolt.
Replace the STATOR
ASSEMBLY or ROTOR
ASSEMBLY.
Is the motor bolt loose?
Is there friction noise coming from the motor?
Dispenser
CAP
①
Main wash
②
Bleash
③
Softner
④
Pre wash
① ② ③ ④
30
Is HE(High Efficiency) detergent used?
Is the proper amount of detergent used
as recommended?
Recommend to reduce the amount
of detergent.
This appliance has an automatic suds sensing function which
prevents overflow.
When excessive suds are sensed,the suds removing
implementations such as drain,water input,and pause will
operate,without rotating the drum
The dispenser should be cleaned periodically to remove
buildup from detergent and other laundry products.
Is sheet detergent used ?
Is the
1. Disassemble the Lid Assembly
form the product
2. Remove the sheet detergent
from the dispenser
3. Clean the dispenser
4. Reassemble the Lid Assembly
Do not add 'fabric sheet softener' into the dispenser.
sheet detergent in dispenser?
Lid Assembly
Dispenser
31
!
" # $# !
$ $ %# $# !
$$
&$&#' $(
)
$
$$ &$
*+!
,
!
- &$ !
)
10.DISASSEMBLY INSTRUCTIONS
Click on the first or last page to see other TCW2013QS service manuals if exist.