LG T8005TE Service Manual ▷ View online
54
(5) How to use Jig
(6) How to check sensing results
Initial operation: Press "RESERVATION" + "START/PAUSE" button together after power on, and press
"RESERVATION" button only again
(displaying the number of pressing button and each data every 0.5 second)
"RESERVATION" button only again
(displaying the number of pressing button and each data every 0.5 second)
< Fig1 >
Sensor
Terminal
of Controller
How to Connect
•
Loosening the front panel of the washing machine
and connect the sensor connecting terminal with
the terminal of the jig.
After supplying water to the washing bath, agitate
for one minute before using the jig.
Record the sensed value of the sensor attached
to the current product at Test mode.
Connect the jig, put the jig sensor into the
washing bath, and record the sensed value of the
sensor.
Determine the sensor performance by comparing
the value measured by the jig and the value
measured by the sensor attached to the product.
1 times : TR Controller Group ( 1 ~ 26 )
2 times : Check the temperature sensor codition
0 : Normal
99 : Temperature senosr’s error,
(Stop sensing for Temperature and Hardness)
3 times : Temperature of supplied water
4 times : Increment/decrement of washing time according to temperature
5 times : Washing stream at Motor off according to temperature
6 times : The number of comparing the conductivity of washing with rinsing conductvity
0 ~ 9 : Normal
99 : Abnormal (Stop the sensing of Hardness)
7 times : Sensored result (0 ~ FF: hexadecimal is displayed)
.
.
.
18 times : Initial stage
55
5. EXPLODED VIEW
TUB ASSEMBLY
TOP COVER
ASSEMBLY
CABINET
ASSEMBLY
49
5-1. THE EXPLODED VIEW OF TOP COVER ASSEMBLY
A010
A020
A230
A240
A051
A052
A200
A190
A150
A160
A271
A270
A270
HOT(ORANGE)
COLD(BLUE)
A185
A180
COLD(BLUE)
: Non-Service Part
A100
A027
A210
50
5-2. THE EXPLODED VIEW OF OUT CASE ASSEMBLY
F070
F020
F002
: Non-Service Part
F004
F003
F005
F080
F090
For Pump
F024
F023
Click on the first or last page to see other T8005TE service manuals if exist.