DOWNLOAD LG T1449TEFT1 / T1503TEF1 Service Manual ↓ Size: 2.58 MB | Pages: 58 in PDF or view online for FREE

• Use to set a delayed finishing time.
• The time increases when the button

is pushed.

• The following settings are indicated

as the button is pushed 3 4

5

... 11 

12

14

16

...46 48

3 HOUR.

• To cancel delay time, turn the power

switch off.

• It only operates in FUZZY Program.
• During being detected by the sensor, the LED flashes green, orange 

and red in turn. And, after detecting, the LED lights a specific color according to the detecting condition as
follows:

If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.) is determined as
better than the standard one, it optimizes the algorithm to save the energy by decreasing washing time/strength,
and the LED automatically turns to red.
If the current washing condition is determined as worse than the standard one, it optimizes the algorithm by
increasing washing time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one, the algorithm has no change and the
LED turns to green.

• Use to start or pause the

washing process.

• Repeats start and pause by

pushing the button.

• Use to turn the power on or off.
• Push again and power goes on or off
• The power goes off automatically about

10 seconds after the wash is finished.

• Use for selecting wash program.
• This button allows you to  select 8

different  programs for  different kinds  of
laundry and dirtiness.

• program selections light up in sequence as

follows: FUZZY(NORMAL) 

WOOL

QUICK WASH 

JEAN

SMART

CLEANING

SILENT

FAVORITE

TUB CLEAN 

FUZZY(NORMAL)

etc. Select the desired program by
pressing the button.

* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use 

TUB CLEAN course to clean the tub. (refer to page 21)

* Even if the water level or the water temperature are changed by the user in FUZZY(Normal) Program, 

the sensor will still work. The sensor algorithm may differ according to models.

* The control panel may differ according to different models.

17

Used for normal loads, this

mode automatically selects the

most appropriate conditions

and completes the sequence

in one operation. The built-in

sensor detects the size of the

load and the ideal wash

power and wash, rinse and

spin times are set accordingly .

Use this mode when washing
lightly soiled clothes for a short
time. The highly recommended
laundry amount is under 2.0kg.

Use this program to increase
rising performance.
This would include underwear
and baby clothes.
If someone has sensitive skin or
skin trouble,use this program.

AUTO OFF

t  Select the

program on

the Control

panel.

t Add the appropriate

quantity of Detergent as
indicated by the WATER
LEVEL next to 
WATER DETERGENT.
Or follow the Detergent
manufacturer’s
instructions

t Add the appropriate

quantity of Detergent as

indicated by the WATER

LEVEL next to 

Or follow the Detergent

manufacturer’s

instructions

Use Jean program when
washing Jeans of different sizes

t Select the

JEAN program

on the Control

panel.

t  Spread

the jean

evenly in

the tub

t  Select the

program on

the Control

panel.

Use this program for washing
delicate fabrics such as lingerie and
woolens. (wash only “water
washable” clothes)
Before washing your woolens
check the care label for the
washing instructions.
(wash only water washable clothes)

t  Use neutral Detergent

appropriate for the
laundry.

t  When washing

woolens use a mild
Detergent
recommend- ed for
washing wool.

t  Select the

program on the

Control panel.

18

START
PAUSE

t  The pulsator rotates for

8 seconds to detect the
laundry load.

t  Then the WATER LEVEL

and the amount of
Detergent to be used
will be shown and
water will be supplied.

t  Water will be

supplied for 2
minutes after the start
of the wash to
supplement the
water the laundry
has absorbed.

t  When the wash

program ends, the
buzzer will ring for
10 seconds before
the Power goes off
automatically.

t  If water is already in the tub, or

putting wet laundry into the tub
before starting will increase the
WATER LEVEL.

t  With lightweight bulky loads,

WATER LEVEL can be set low. 

t  Changes to Water Temperature

(HOT/COLD) and wash level are
possible during operation.

t  When setting the WATER LEVEL

manually, do not set to Medium to
prevent damage to laundry.

t  Washing with HOT water may

damage the laundry (Water is set to
cold automatically). Ensure that the
load is under 2kg.

t  In order to avoid  damage to laundry, 

the spin cycle may appear slow.
This also avoids wrinkles and
clothing may still contain some
water. This is normal.

t  When static pressure of water is

more than 2kg/cm

2

, the QUICK

WASH course will be within
19min.

19

Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty. 
SOAK mode can be used with FUZZY or JEAN, SILENT or FAVORITE program.

Press the POWER(AUTO OFF) button to turn power on.

Press the PROGRAM button to select the washing program.

•  SOAK will not work in WOOL and QUICK WASH, 

TUB CLEAN Program.

•  Keep pressing the WASH button until the light turns on ‘Soak’ and

‘Wash’ simultaneously as next image.

•  SOAK program only works when socking time is 40, 50 or 60 minutes.

Press the WASH button, to select SOAK program.

Add the Detergent.

•  The appropriate quantity of Detergent marked next to the

WATER LEVEL of WATER-Detergent.

Add the laundry and press the START/PAUSE button.

•  The WATER LEVEL will be shown and water will be supplied.

Close the lid. 

Finish

•  Water will  be supplied for 2 minutes after the start of the wash

to supplement the absorbed water by the laundry. 

When the wash program ends, the buzzer will ring for 10seconds
before the Power goes off automatically.

POWER

AUTO OFF

START
PAUSE

min

min

min

min

min

min

min

min

min

min

min

min

min

Soak-Wash

• Order of  Soak-Wash timing

• Select soaking time 40minutes, 50minutes, or 60minutes (including washing time) by pressing the Wash button repeatedly.
• If necessary, select the times of Rinse and the time for Spinning by pressing the Rinse or Spin buttons till you reach the desired

times.

20