DOWNLOAD LG F92932WH Service Manual ↓ Size: 26.82 MB | Pages: 57 in PDF or view online for FREE

2 Push out PANEL ASSEMBLY, CONTROL after

Push the hook(     ,     ) below.

2

1

1 The plate assembly(Top) is disassembled.
2 Pull out the drawer and unscrew 2 screws.

1 Two screws are unscrewed.

3 Unscrew the screws from the lower cover.

2 Disassembly lower cover assembly.

3 Unscrew the screw from the CABINET COVER.

1 2

3 Lift the side the Control Panel Assembly and

pull it out

Two screws are unscrewed

Pull the drawer to arrow direction.

Screws

Disassembly 3 connectors.

• Just check cut-off.

• Check the operating time.

* Door Locking time : 

1~8

sec.

Check the time between from
input the power to parts
move up, then Door locked.

* Door Releasing time : 

25~100

sec.

Check the time between from off
the power to parts
move down, then Door released.

1

1

1

1

2

4 Lift and separate the cabinet cover.

1 Two screws are unscrewed and disassembly

cabinet cover.

2 The Door Lock S/W is disconnected form the

wiring connector and the strap.

: When assembling the CABINET

COVER, connect the Door S/W connector.

• V ~ U (8~11Ω)
• U ~ W (8~11Ω)
• W ~ V (8~11Ω)

• Common ~ Ha (5~15kΩ)
• Common ~ Hb (5~15kΩ)

1 Remove the back cover.

2 After loosening the bolt, Rotor, pull out the

rotor.

1 Remove the 6  bolts from the stator.
2 Disconnect the 2 connectors.

1 Remove the hinges (Damper) at the Tub.

3 The hinge at the base is pulled off. 

(In directions  of the arrow)

2 The Hinge(Damper) at the base is  pulled off by

pressing on the snaps at the sharp end.

1 Loosen the nut.
2 Remove washing heater by pulling out.

When assembling the washing heater, insert

the heater to heater clip on the bottom of tub

and check the position of wire color.

< Heater for Washing>
• Rating : 230V 2000W
• Resistant : 24.5~28.5Ω

1 Disassembly Top Plate, Control Panel, 

Drawer Panel Assembly, Cabinet Cover 

Assembly, Lower Cover Assembly

4 Remove pump outlet hose.
5 Remove tub pump bellows.
6 Remove cap(Remaining Hose).
7 Disconnect the wiring.
8 Three screws are unscrewed from the cabinet.
9 Remove the pump to arrow direction.

• Rating : 220/240V 50Hz
• Resistant : 162~176Ω

Bellows

Pump

Hose

Circulation

Hose

Remaining

Hose