LG F92932WH Service Manual ▷ View online
20
If you press the Start/Pause button in error condition, any error except
will disappear and the
machine will change into the pause status.
In case of
In case of
,
, if the error is not resolved within 20 sec., and in case of all other errors, if the
error is not resolved within 4 min., the power will turn off automatically and the error only will blink.
But in the case of
But in the case of
, the power will not turn off.
7-6. ERROR DISPLAY
ERROR
SYMPTOM
CAUSE
WATER
I
NLET
E
RROR
• Not reached the water level(248) within 10 minutes
after water supplied or not reached to the preset
water level within 25 minutes.
Page 26
1
U
NBALANCE
E
RROR
• The appliance is tilted.
• Laundry is gatherd to one side.
Page 27
2
WATER
O
UTLET
E
RROR
• Not fully drained within 10 minutes.
Page 28
3
OVER
F
LOW
E
RROR
• Water is overflowing (under 21.3kHz).
If " " is displayed, the drain pump operates
to drain the water automatically.
Page 30
4
P
RESSURE SENSOR
S/W
E
RROR
• The pressure sensor switch is out of order.
Page 31
5
D
OOR OPEN
E
RROR
• In case of operating the reservation function or the
other function with door opened. Close the door,
then the error display is resolved.
• The door switch is out of order.
Page 32
6
T
HERMISTOR(HEATING)
E
RROR
• The THERMISTOR is out of order.
Page 33
7
21
ERROR
SYMPTOM
CAUSE
MOTOR
L
OCKED
E
RROR
• The connector in the LEAD WIRE ASSEMBLY is
not connected to the connector of STATOR
ASSEMBLY.
Reconnect or repair the connector.
• The hall sensor is out of order/defective.
Replace the STATOR ASSEMBLY
Page 34
8
• Water leaks
Page 36
9
P
OWER
F
AILURE
W
A
TER
L
E
AKAGE
• The washer experienced a power failure
Press the start/pause button
10
22
7-6. TROUBLESHOOTING WITH ERROR
Water Inlet Error (IE)
Is the water tap closed?
[Note] Environmental safety check list
1. No water tap leakage or freeze 4. No entanglement of water supply hose.
2. No water shortage. 5. No water supply hose leakage
3. The inlet filter is not cloggeed.
2. No water shortage. 5. No water supply hose leakage
3. The inlet filter is not cloggeed.
Check the
Water tap
and open it fully.
When there is water in the tub,
is the water level frequency
over 26.0khz
is the water level frequency
over 26.0khz
?
Reconnect or repair the
Connector
.
Or replace the
Harness
.
Replace the
Inlet Valve
.
Is the
Connector
connected correctly to the
Main PCB
and the
Inlet Valve
? is the
Harness
alright ?
Check the
Air Chamber
and
the Tube
(clogged)
Check the water level frequency again,
if it is over 26.2KHz, replace
if it is over 26.2KHz, replace
the Pressure switch.
YES
YES
NO
Replace the
Main PCB
.
NO
YES
YES
NO
NO
Is the resistance of each lnlet valve within 3.5 ~4.5 kΩ ?
When the washing machine is started, is the inlet valve
operating?
operating?
Pre Valve
Steam Valve
Main Valve
1
2
1
2
3
3
NO
23
Unbalanced Error (UE)
Does the load lean toward one
side
side
, or is the load a few items?
Is the washing machine installed
at an angle?
at an angle?
Adjust the height of washing
machine to be kept horizontally.
( Page 7)
machine to be kept horizontally.
( Page 7)
Is the laundry mixed?
The few items of clothing will clump together
and their weight will be in one place on the drum,
throwing the weight off during spin mode.
So add some laundry to overcome UE error.
and their weight will be in one place on the drum,
throwing the weight off during spin mode.
So add some laundry to overcome UE error.
And rearrange load to allow proper spinning.
Try rearranging the laundry in drum
Or the laundry is separated by size, type, and color.
Or the laundry is separated by size, type, and color.
Separate by size,
type and color
YES
YES
NO
NO
YES
Click on the first or last page to see other F92932WH service manuals if exist.