LG F2004RDT Service Manual ▷ View online
10
1
2
3
4
5
6
7
7
Before servicing, ask the customer what the trouble is.
When installing or repairing the washer, put on long gloves and safety glasses.
Check the setup (power supply is 120 V
When installing or repairing the washer, put on long gloves and safety glasses.
Check the setup (power supply is 120 V
AC
, remove the transit bolts, level the washer, etc.)
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
STANDARD INSTALLATION
The appliance should be installed as follows:
Remove the 4 shipping bolts
with the supplied wrench.
with the supplied wrench.
આ
Remove the lower boits fist.
It is easier that way.
It is easier that way.
Keep the shipping bolts and
spanner for future use.
Insert the 4 caps (provided)
into the hole.
spanner for future use.
Insert the 4 caps (provided)
into the hole.
Turn clockwise to raise;
counterclockwise to lower.
counterclockwise to lower.
Turn the leveling feet to
adjust the appliance.
adjust the appliance.
Lower
Higher
REMOVE THE SHIPPING
BOLTS
INSTALL THE APPLIANCE
ON A FLAT AND FIRM SURFACE
ADJUST THE
LEVELING
4. INSTALLATION & TEST
Keeping
11
Verify that the rubber washer is inside of the
valve connector.
Tighten the inlet hose securely to prevent leaks.
Install the inlet hose to correct temperature
water tap.
Otherwise, it cause drips on the drawer panel
handle and drawer panel.
HOW TO CONNECT THE INLET HOSE
CONNECT THE DRAIN HOSE
• Make sure that the hose is not twisted.
CONNECT POWER PLUG
આ The end of the drain hose should be placed less than 96” from the floor.
• Avoid submerging the end of the hose.
• Connect the power plug to the wall outlet.
• Avoid connecting several electric devices,
as doing so may cause a fire.
Hot
Cold
12
7 TEST OPERATION
1
Preparation for
washing.
washing.
• Connect the power plug to the
outlet.
• Connect the inlet hoses.
2
Press the POWER button.
3
Press the START/PAUSE
button.
button.
• Listen for a click to determine if the
door has locked.
6
Check the water heating
function.
function.
• Press the WASH/RINSE button
and the present temperature will
be displayed.
be displayed.
• Check if the drum rotates
clockwise and counterclockwise.
5
Check the automatic reverse
rotation.
rotation.
4
Check the water supply.
• Check if water is supplied through
the detergent dispenser.
7
Check the drain and spin
functions.
functions.
• Power off and the power on.
• Press the SPIN SPEED button.
• Press the START/PAUSE button.
• Check the spin and drain functions.
• Press the SPIN SPEED button.
• Press the START/PAUSE button.
• Check the spin and drain functions.
• Listen for a click to determine if the
door is unlocking.
8
Press the START/PAUSE
button.
button.
9
Water removal
• If SERVICE is needed during
check, remove the remaining
water by pulling out the hose cap.
water by pulling out the hose cap.
■ F2004RDT
Click on the first or last page to see other F2004RDT service manuals if exist.