LG F14953WHS Service Manual ▷ View online
20
If you press the Start/Pause button in error condition, any error except will disappear and the
machine will change into the pause status.
In case of
machine will change into the pause status.
In case of
,
, if the error is not resolved within 20 sec., and in case of other errors,
if the error is not resolved within 4 min., power will be turned off automatically and the error only will be
blinked. But in the case of
blinked. But in the case of
, power will not be turned off.
7-5. ERROR DISPLAY
ERROR
SYMPTOM
CAUSE
WATER
I
NLET
E
RROR
• Not reached to the water level(246) within 8 minutes
after water supplied or not reached to the preset
water level within 25 minutes.
water level within 25 minutes.
Page 23
1
U
NBALANCE
E
RROR
• The appliance is tilted.
• Laundry is gatherd to one side.
• Laundry is gatherd to one side.
Page 24
2
WATER
O
UTLET
E
RROR
• Not fully drained within 10 minutes.
Page 25
3
OVER
F
LOW
E
RROR
• Water is over flowing (over 8 level).
If " " is displayed, the drain pump operates
to drain the water automatically.
to drain the water automatically.
Page 27
4
P
RESSURE SENSOR
S/W
E
RROR
• The sensor pressure switch is out of order.
Page 28
5
D
OOR OPEN
E
RROR
• In case of operating the reservation function or the
other function with door opened. Close the door,
then the error display is resolved.
then the error display is resolved.
• The door switch is out of order.
Page 29
6
T
HERMISTOR(HEATING)
E
RROR
• The THERMISTOR is out of order.
Page 30
7
21
ERROR
SYMPTOM
CAUSE
MOTOR
L
OCKED
E
RROR
• The connector in the LEAD WIRE ASSEMBLY is
not connected to the connector of STATOR
ASSEMBLY.
ASSEMBLY.
Reconnect or repair the connector.
• The hall sensor is out of order/defective.
Replace the STATOR ASSEMBLY
Page 31
8
• Water leaks
Page 36
9
P
OWER
F
AILURE
• The washer ecperienced a power failure
Page 33
10
22
7-6. TROUBLESHOOTING WITH ERROR
Water Inlet Error (IE)
Is the water tap closed?
[Note] Environmental safety check list
1. No water tap leakage & freeze.
2. No entanglement of water supply hose.
3. No water shortage.
4. No water supply hose leakage.
5. No the inlet filter clogged.
Check the
Water tap
and open it fully .
When there is water in the tub,
is the water level frequency
over 26.2KHz?
is the water level frequency
over 26.2KHz?
Replace the
Inlet Valve
.
Is the
Connector
connected correctly to the
Main
PCB
and the
Inlet Valve
?
Or is the
Harness
alright ?
Check the
Air Chamber
and
the Tube
(clogged)
And When you check the water level frequency again,
if it is over 26.2KHz, youreplace
if it is over 26.2KHz, youreplace
the Pressure switch.
YES
YES
NO
Replace the
Main PCB
.
NO
YES
YES
NO
NO
Is the each resistance of Inlet Valve within
3.5 ~4.5 k
3.5 ~4.5 k
Ω ?
When the washing machine is started,
is operated the inlet valve?
is operated the inlet valve?
Pre. Valve
Main Valve
Dry Valve
1
3
2
1
3
2
Reconnect or repair
the
Connector
.
Or replace the
Harness
.
NO
23
Unbalanced Error (UE)
Does the load lean toward one
side, or is the load a few items?
Is the washing machine installed
at an angle?
Adjust the height of washing
machine to be kept horizontally.
( Page 7)
Is the laundry mixed?
The few items of clothing will clump together
and their weight will be in one place on the drum,
throwing the weight off during spin mode.
So add some laundry to overcome UE error.
And rearrange load to allow proper spinning.
Try rearranging the laundry in drum
Or the laundry is separated by size, type, and color.
Separate by size,
type and color
YES
YES
NO
NO
YES
Click on the first or last page to see other F14953WHS service manuals if exist.