DOWNLOAD LG F1407TDS6 / F1407TDSP6 / F1407TDSP7 / F1407TDSP9 / F1407TDSPU Service Manual ↓ Size: 4.35 MB | Pages: 36 in PDF or view online for FREE

Model
F1407TDS6 F1407TDSP6 F1407TDSP7 F1407TDSP9 F1407TDSPU
Pages
36
Size
4.35 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
f1407tds6-f1407tdsp6-f1407tdsp7-f1407tdsp9-f1407td.pdf
Date

LG F1407TDS6 / F1407TDSP6 / F1407TDSP7 / F1407TDSP9 / F1407TDSPU Service Manual ▷ View online

29
1
The cabinet cover clamp is removed by
special jig for service and the gasket is
released.
2
Two screws are unscrewed.
1
Lift and separate the cabinet cover.
NOTE : When assembling the CABINET
COVER, connect the Door S/W connector.
SWITCH ASSY, DOOR LOCK
PWB ASSEMBLY(POWER)
1
The cabinet cover clamp is removed and the
gasket is released.
2
Two screws are unscrewed.
3
The Door Lock S/W is disconnected form the
wiring connector and the strap.
1
The plate assebmly(Top) disassembled.
2
The cover of PWB assemble(Power) is removed.
(Push the hook bellow.)
3
Disconnect connector from the PWB.
4
Two screw is unscrewed.
30
TSG (TURBO STEAM GENERATOR)
1
Remove the housing coupled the TSG.
(Connector, Hoses, Earth Screw).
2
Taking out the screw of the TSG.
[WD-
*****
FDS]
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
1
Remove the back cover.
2
After loosening the bolt, Rotor, pull out the
rotor.
1
Remove the 6 bolt from the stator.
2
Disconnect the 2 connectors.
1
Remove the hinges (Damper) at the Tub.
2
The Hinge(Damper) at the case is pulled off
pressing on the snaps at the sharp end.
3
The hinge at the base is pulled off.
(To arrow direction)
(ROTOR ASSEMBLY)
(STATOR ASSEMBLY)
(FRICTION DAMPER)
31
PUMP
1
Remove pump outlet hose.
2
Remove tub pump bellows.
3
Remove cap(Remaining Hose).
4
Disconnect the wiring.
5
Three screws are unscrewed from the cabinet.
6
Remove the pump to arrow direction.
HEATER
1
Loosen the nut.
2
Remove washing heater by pulling out.
CAUTION
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub
and check the position of wire color.
32
WHEN FOREIGN OBJECT STUCK BETWEEN DRUM AND TUB
1
Remove washing heater.
2
Remove the foreign object(wire, coin, etc) by
inserting long bar in the hole.
SWITCH ASSEMBLY, SAFETY
1
Unscrew 4 screws from the back cover.
2
Disconnect the wiring connector.
First, Press hook and turn the safety switch
assembly switch assembly safety.
Page of 36
Display

Click on the first or last page to see other F1407TDS6 / F1407TDSP6 / F1407TDSP7 / F1407TDSP9 / F1407TDSPU service manuals if exist.