LG F12682FDS Service Manual ▷ View online
32
① Disassemble the top plate assembly.
② Pull out the drawer.
③ Push out the DISPENSER ASSEMBLY
after unscrew 2 screws.
When reconnecting the connector
① Unscrew the nut at the lower part of the
dispenser.
① Disassemble the 4 or 5 connectors from
the valves.
① Unscrew 1 screws from the back of the
cabinet.
② Disassemble 2 connectors.
① Blue Housing(BK-YL/BK)
② Blue Housing(BK-GY/WH)
③ White Housing(BK-WH/BK)
④ Red Housing(BK-VI/BK)
⑤ White Housing(BK-BL/RD)
② Unscrew 2 or 4 screws from the back of
the cabinet.
33
Unscrew the 4 screws from upper of the canbinet
cover.
Unscrew the screw from filter cover.
Put a flat ( - ) screwdriver or putty knife into the both
sides of the filter cover, and pull it out.
Unscrew the screw from the lower side of the cabinet
cover.
Unscrew the 2 screws from the lower of the DECO
PANEL.
PANEL.
Unscrew the 4 screws from the back of the DECO
PANEL.
PANEL.
Pull out the DECO PANEL
34
Open the door.
Disassemble the clamp assembly.
Tilt the cabinet cover.
Disconnect the door switch connector.
NOTE: When assembling the CABINET
COVER, connect the connector.
Lift and separate the cabinet cover.
Disassemble the clamp assembly.
Disassemble the Gasket.
35
DOOR
DOOR LOCK SWITCH ASSEMBLY
HOW TO ASSEMBLE THE MOTOR
Open the door.
Remove the two screws from the Hinge.
When removing the Door Assembly, it is necessory
to hold the break is inner of the cabinet cover.
Open the door and disassemble the CLAMP
ASSEMBLY.
Unscrew the 2 screws.
Be careful! The door is heavy.
NOTE
• Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
Click on the first or last page to see other F12682FDS service manuals if exist.