LG F12682FDS Service Manual ▷ View online
Sanitary
12
5. OPERATION
• Use this button to turn the power
On/Off.
• Rotate the Cycle selector knob to
select the cycle designed for different
types of fabric and soil levels.
types of fabric and soil levels.
POWER BUTTON
START/PAUSE BUTTON
WASH BUTTON
CYCLE SELECTOR KNOB
EST. TIME REMAINING
• Soak: Use this mode to wash normal clothes or think and heavy
clothes which are excessively dirty.
• Pre Wash: Use this option for loads that need pretreatment. It add 16
minutes prewash and drain.
• Wash: This is the main wash cycle for General laundry.
• Less Steam: Use this option to a steam wash for only a small amount
of laundry, select the this option.
• Eco Steam: Use this option to a steam wash while reducing the
electricity consumption, select the option
• Use this button to Start/
Stop the washer.
• This display shows:
a) the estimated time remaining in the
cycle when operating.
b) an error code when an error has been
detected.
Favorite
• Add rinse Water: This option provides an
additional rinse.
• Favorite:This option allows you to store a
customized wash cycle for future use.
13
CHILD LOCK
RINSE, SPIN, TEMP. BUTTON
DRY BUTTON
TIME DELAY
STATUS INDICATOR
TURBO STEAM
ADD RINSE WATER, FAVORITE BUTTON
• Use this option to prevent unwanted use of the
washer. Press and hold the Wash and Rinse
button for 3 seconds to lock/unlock control.
button for 3 seconds to lock/unlock control.
• When Child lock is set, CHILD LOCK lights
and all buttons are disabled except the Power
button. You can lock the washer while it is
operating.
button. You can lock the washer while it is
operating.
• Dry programs selected by
pressing the Dry button.
• By pressing the button
[Normal – More – 30 – 60 – 90 –
120 – 150 – Low Temp. – Iron]
can be selected.] can be selected.
120 – 150 – Low Temp. – Iron]
can be selected.] can be selected.
• This option features upgraded
washing performance with low
energy and water
consumption.
energy and water
consumption.
• Allows the start of any cycle
to be delayed for 3~19
hours.
hours.
• Select a water temperature based on the type of
load you are washing.
• To change the spin speed, press the Spin Speed
button repeatedly to cycle through available options.
• To change the Rinse Cycling, press the Rinse button
repeatedly through available options.
• These lights show which portion
of the cycle the washer is
operating.
operating.
14
7. TROUBLE SHOOTING
7-1.BEFORE SVC CHECKING
Be careful of electric shock or disconnecting the parts while trouble shooting.
Voltage of each terminal is 110V a.c and DC while applying an electric current.
7-2.QC TEST MODE.
Pressing Rinse, and Spin button simultaneously.
Press the Power button, while the above condition.
Press the Start/Pause button as follows.
7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY
Press the Rinse and Spin button simultaneously.
ex) 241 : Water level frequency = 241
10
-1
kHz
=24.1 kHz
7-4.HOW TO KNOW TO TEMPERATURE OF EACH THERMISTOR
AT OPERATING CONDITION.
■ Thermistor in tub : Press the [Temp.] button.
■ Thermistor in dry duct : Press the [Turbo Steam] button.
■ Thermistor in dry duct : Press the [Turbo Steam] button.
The digits means water level frequency(10
-1
kHz)
Number of times the
Start/Pause button is pressed
Check Point
Display Status
None
Turns on all lamps and locks the door.
1 time
Tumble clockwise
rpm (42~50)
2 times
Low speed Spin.
rpm (55~65)
3 times
High speed Spin
rpm (110~120)
4 times
Inlet valve for prewash turns on.
Water level frequency (25~65)
5 times
Inlet valve for main wash turns on.
Water level frequency (25~65)
6 times
Inlet valve for hot water turns on.
Water level frequency (25~65)
7 times
Inlet valve for steam water turns on.
Water level frequency (25~65)
8 times
Inlet valve for dry water turns on.
Water level frequency (25~65)
9 times
Tumble counterclockwise
pm (42~50)
10 times
Wash heater turns on for 3 sec.
Water temperature
11 times
Circulation pump turns on.
Water level frequency (25~65)
12 times
Drain pump turns on.
Water level frequency (25~65)
13 times
Dry heater turns on for 3 sec.
Water temperature
14 times
Water level Sensor for Steam
Water level frequency of TSG (0~255)
15 times
Steam Heater turns on for 1,2 sec.
TSG temperature
16 times
Power off and unlock the door.
Turn off all lamps.
15
7-5.ERROR DISPLAY.
If you press the Start/Pause button in error condition, any error except ‘
’ will disappear and the
machine will change into pause status.
In case of
if the error is not resolved within 20 sec., and in case of other errors,
if the error is not resolved within 4 min., power will be turned off automatically and the error only will be
blinked. But in case of
blinked. But in case of
, power will not be turned off.
ERROR
SYMPTOM CAUSE
1
2
3
4
5
6
7
• Not reached to the water level(246)within 8
minutes after water supplied or not reached to
the preset water level within 25 minutes.
• Not fully drained within 10 minutes.
• Water is over flowing(over 8 level).
※ If is displayed, drain pump operates to
drain water automatically.
• The sensor pressure switch is out of order.
• In case of operating the reservation function or
the other function with door opened. Close the
door, then the error display is resolved.
• The door switch is out of order.
• The appliance is tilted.
• Laundry is gatherd to one side.
• The THERMISTOR is out of order.
WATER INLET
ERROR
DRAIN ERROR
OVERFLOW
ERROR
SENSOR PRESSURE
S/W ERROR
DOOR OPEN
ERROR
IMBALANCE
ERROR
HEATING
ERROR
Click on the first or last page to see other F12682FDS service manuals if exist.