LG F1255FDS27 Service Manual ▷ View online
33
NOTE: When assembling the CABINET
COVER, connect the connector.
Open the door.
Disassemble the clamp assembly.
Tilt the cabinet cover.
Disconnect the door switch connector.
Disassemble the clamp assembly.
Disassemble the Gasket.
34
DOOR
DOOR LOCK SWITCH ASSEMBLY
Put a flat ( - ) screwdriver into the openng of the hinge,
and pull out the hinge cover.
Be careful! The door is heavy.
NOTE:
Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
Open the door.
Unscrew the 7 screws from the HINGE COVER.
Open the door and disassemble the CLAMP
ASSEMBLY.
Unscrew the 2 screws.
Unscrew a screw from the lower side of door.
Disassemble the door upward.
35
PUMP
HEATER & THERMISTOR
CAUTION
When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
Tighten the fastening nut so the heater is
secure.
Disassemble the cabinet cover.
Separate the pump hose, the bellows
and the circulation hose assembly from the
pump assembly.
Disassemble the pump assembly in arrow
direction.
Disassemble the cabinet cover.
Separate 2 connectors from the heater.
Loosen the nut and pull out the heater.
36
Disassemble the cabinet cover.
Unplug the white connector from the thermistor.
Pull it out by holding the bracket of the
thermistor.
Unscrew the 4 screws from the back cover.
Unscrew the single screw from the lower-right
side of the cabinet.
Disconnect the connector from PWB Harness.
WHEN FOREIGN OBJECT IS STUCK BETWEEN DRUM AND TUB
SENSOR ASSEMBLY (BALL SENSOR)
Click on the first or last page to see other F1255FDS27 service manuals if exist.