LG F1234RDSB / F1234RDSU Service Manual ▷ View online
29
①
Lift and separate the cabinet cover.
①
The cabinet cover clamp is removed and the
gasket is released.
gasket is released.
②
Two screws are unscrewed.
③
The Door Lock S/W is disconnected form the
wiring connector and the strap.
SWITCH ASSY, DOOR LOCK
NOTE : When assembling the CABINET COVER,
connect the Door S/W connector.
30
①
Remove the back cover.
②
After loosening the bolt, Rotor, pull out the
rotor.
①
Remove the 6 bolt from the stator.
②
Disconnect the 2 connectors.
①
Remove the hinges (Damper) at the Tub.
②
The Hinge(Damper) at the base is pulled off
pressing on the snaps at the sharp end.
③
The hinge at the base is pulled off.
(To arrow direction)
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
Rotor
Bolt
Friction
Damper
Damper
Hinge
(Damper)
(ROTOR ASSEMBLY)
(STATOR ASSEMBLY)
(FRICTION DAMPER)
TSG (TURBO STEAM GENERATOR)
①
Remove the housing coupled the TSG
(Connector, Hoses, Earth Screw)
②
Taking ou the screw of the TSG.
[F1
03FDS]
31
①
Remove pump outlet hose.
②
Remove tub pump bellows.
③
Remove cap(Remaining Hose).
④
Disconnect the wiring.
⑤
Three screws are unscrewed from the cabinet.
⑥
Remove the pump to arrow direction.
①
Loosen the nut.
②
Remove washing heater by pulling out.
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub
and check the position of wire color.
the heater to heater clip on the bottom of tub
and check the position of wire color.
CAUTION
Washing
Heater
Wire Color:Red
Heater
Wire Color:Red
Wire Color:
Yellow
Nut
Ring Terminal
PUMP
HEATER
32
①
Remove washing heater.
②
Remove the foreign object(wire,coin,etc) by
inserting long bar in the hole.
inserting long bar in the hole.
WHEN FOREIGN OBJECT STUCK BETWEEN DRUM AND TUB
SWITCH ASSEMBLY, SAFETY
Unscrew 4 screws from the back cover.
Disconnect the wiring connector.
First, Press hook and turn the safety switch
assembly switch assembly safety.
Click on the first or last page to see other F1234RDSB / F1234RDSU service manuals if exist.