LG F1234RDSB / F1234RDSU Service Manual ▷ View online
25
9. DISASSEMBLY INSTRUCTIONS
�
Disassemble and repair the parts after pulling out power cord from the outlet.
①
Unscrew the screws on the top plate.
②
The plate assembly(Top) is pulled back and
then upward to arrow direction.
③
The cover(Inner) is disassembled.
①
Pull out the drawer and unscrew 2 screws.
②
Lift the side the Control Panel Assembly and pull it out
①
Two screws is unscrewed.
②
Push out PANEL ASSEMBLY,CONTROL after Push
the hook(
the hook(
①, ②
) below.
①
The PWB assembly(Display) is disconnected.
②
When 7 screws are unscrewed on the PWB
insulator and the PWB assembly(Display) is
disassembled from the PWB insulator.
disassembled from the PWB insulator.
CONTROL PANEL
PLATE ASSEMBLY(TOP)
PWB ASSEMBLY
(DISPLAY)
(DISPLAY)
DRAWER PANEL ASSEMBLY
PANEL ASSEMBLY, CONTROL
26
①
The back cover is removed.
②
One screw is unscrewed.
③
Pull the PWB assembly(Main) to arrow
direction
④
Two screws is unscrewed.
⑤
The cover of PWB assembly(Main) is
removed.
⑥
Disconnect connector from the wiring.
①
The plate assembly(Top) disassembled.
②
The cover of PWB assembly(Power) is
removed.
③
(Push the hook bellow.)
④
Disconnect connector from the PWB.
⑤
Two screw is unscrewed.
①
The plate assembly(Top) are disassembled.
②
Pull the drawer to arrow direction.
③
Two screws are unscrewed.
①
The hose clamps and the hose are
disassembled.
②
The ventilation bellows are disassembled on
the tub.
PWB ASSEMBLY(MAIN)
PWB ASSEMBLY(POWER)
DISPENSER ASSEMBLY
Dispenser assembly
Option
DRAWER
27
①
Disconnect the wiring connector.
②
Remove the valve by two screws of the valve
holder.
�
When reconnecting the connector
VALVE
�
(STEAM)
VIOLET/BLACK-BLACK
VALVE
�
(PRE-WASH)
WHITE/BLACK-BLACK
VALVE
�
(NORMAL-WASH) GRAY/BLACK
VALVE
�
(HOT)
BLACK/WHITE
①
Open the door completely.
②
Remove the two screws from the hinge.
※
When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
the Cabinet Cover.
Pull it out from hose.
※
First, prepare a bucket to put in the remained
water.
INLET VALVE
3
2
4
1
DOOR
CAP
(REMAINING HOSE)
Removing method of remained water
28
PANEL ASSEMBLY, CONTROL
The plate assembly(Top) is disassembled.
Pull out the drawer and unscrew 2 screws.
Lift the side the Control Panel Assembly and pull
it out
it out
Two screws is unscrewed.
Push out PANEL ASSEMBLY,CONTROL after
Push the hook(
Push the hook(
①, ②
) below.
Unscrew the screws from the lower cover.
The cabinet cover clamp is removed by special
jig for service and the gasket is released.
jig for service and the gasket is released.
Two screws are unscrewed.
Unscrew all the screws on the upper and lower
sides of the CABINET COVER.
sides of the CABINET COVER.
Click on the first or last page to see other F1234RDSB / F1234RDSU service manuals if exist.