DOWNLOAD LG F1069FD3S Service Manual ↓ Size: 6.27 MB | Pages: 42 in PDF or view online for FREE

90°C

75°C

60°C

MEDICAL Extra Hot/Cold

HOT Extra Hot/Cold

NORMAL Hot/Cold

High

High

High

O

O

O

40°C

NORMAL Warm/ Cold

Middle

O

DELICATES

Cold/Cold

Low

O

RINSE+SPIN 

(OPTION)

Cold/Cold

High

O

7. WIRING DIAGRAM/PROGRAM CHART

Program Chart

8. TROUBLESHOOTING

8-1. BEFORE PERFORMING SERVICE

8-2. QC TEST MODE.

Be careful of electric shock when disconnecting parts while troubleshooting.

OPL Type

The washer must be empty.

1. Push the 90°C MEDICAL & 60°C NORMAL button at the same time.
2. Push the 75°C HOT button 1 times.
3. Push the START button.
3. Display will show “            ”.

8-3. HOW TO CHECK THE WATER LEVEL FREQUENCY

8-4. HOW TO CHECK THE RPM

Press and hold the ADD SUPER WASH and PERMANENT PRESS buttons simultaneously.

Press the ADD SUPER WASH AND WHITES button simultaneously.

When you check the water level, the first digit is a 0 which means 2. 
A display indicating 041 is a water level frequency of 241 multiplied by 0.1 KHz , for an
actual frequency of 24.1 KHz. 

Under 200 rpm: The display indicates the rpm. (Under 200 rpm) 
Over 200 rpm: The display indicates the rpm. (x 10 rpm)
So, for example a display indicating 050 : rpm of 050 x 10 rpm = 500rpm 

The voltage of each terminal is 220V- when the unit is plugged in.

Number of times the 

START button is pressed

Check Point

Display

None
1 time

2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times

10 times

Turns on all lamps and locks the door

rpm (42~50)

rpm(1000~1150)
Water level frequency (26.2~23.0 kHz)
Water level frequency (26.2~23.0 kHz)
Water level frequency (26.2~23.0 kHz)
Water level frequency (26.2~23.0 kHz)
rpm (42~50)

Tumble Clockwise.
Low Speed Spin
High Speed Spin
Inlet valve for main water turns on.
Inlet valve for hot water turns on.
Inlet valve for softener turns on.
Inlet valve for bleach turns on.
Tumble counter clockwise.

Turn on the heater

Displayed 1U XX, 1g XX and 1O XX
alternately (Version)

16 times

15 times

12 times

11 times

13 times
14 times

High Speed Spin

PDA Signal Check

rpm (1000~1150)

This function is not applied in this machine

Displayed 1U XX, 1g XX and 1O XX alternately

Button Checks.

Turns on all lamps.

Drain Pump turns on.

Displayed 1U XX, 1g XX and 1O XX alternately

Water level frequency (26.2~23.0 kHz)

rpm (550~650)

Displayed XX  

8-5. ERROR DISPLAY

If you press the START button when an error is displayed, any error except      will disappear and the 
machine will go into the pause status.

WATER INLET

ERROR

• Correct water level (246) is not reached within 10 minutes

after water is supplied or it does not reach the preset water
level within 12 minutes.

• The load is too small.
• The appliance is tilted.
• Laundry is gathered to one side.
• Non distributable things are put into the drum.

• Not fully drained within 3 minutes.

• Water is overflowing (water level frequency is over 213).

If               is displayed, the drain pump will operate to
drain the water automatically.

• The SENSOR SWITCH ASSEMBLY is out of order.

• Door not all the way closed. 
• Loose electrical connections at door switch and

PWB Assembly.

• The DOOR SWITCH ASSEMBLY is out of order.

IMBALANCE

ERROR

DRAIN

ERROR

OVER FLOW

ERROR

DOOR OPEN

ERROR

PRESSURE

SENSOR

ERROR