DOWNLOAD LG DD168MWB / DD168MWN Service Manual ↓ Size: 3.19 MB | Pages: 36 in PDF or view online for FREE

Check that the rubber is the inside of valve connector.

Connect inlet hoses firmly to prevent leak.

HOW TO CONNECT INLET HOSE

CONNECT DRAIN HOSE

· Make sure that the hose is not twisted.

CONNECT POWER PLUG

The drain hose should be placed under 100cm from the floor.

· Avoid submerging the end of the hose.

· Connect the power plug to the wall outlet.

· Avoid connecting several electric devices,

It may be the cause of a fire.

7 TEST OPERATION

Preparation
for washing.

· Connect the power plug to the

outlet.

· Connect the inlet hose.

Press the power button.

Press the START/PAUSE
button.

Check the water heating.

· Press both Time Delay and 

Pre Wash buttons simultaneously
the present temperature will be
displayed.

· Check if the drum rotates

clockwise and counterclockwise.

Check automatic reverse turn.

Check the water supply.

· Check if water is supplied through

the detergent dispenser.

Check drain and spin.

· Power off and then power on.

Turn on Spin lamps after pressing
the Start/Pause button and Start
the machine again.

· Check drain and spin.

· Power off and then power on.
· Check if the door can be opened

after Door Lock lamp turns off.

Power off and open the door.

Water removal.

· If SVC is needed during check,

remove the remaining water by
pulling out the hose cap.

· In case of cotton program.

5. OPERATION

• It is possible in cotton

course when 60°C

• 10 programs can be set

depending on the type of

the laundry.

• If the power button is

pressed, all lamps are on

• By turning the dial,

[Cotton–Cotton Quick–Delicate

–Quick 30–Rinse+Spin– Spin–

Hand Wash/Wool–Synthetic–

Baby Care]

can be selected.

(The opposite is possible)

• Display the estimated remaining time (Hour : Minute)

to finish.

• In case of abnormal operation, error indications are

displayed.

(                                                                                   )

• See troubleshooting guide.

• Use the button to start or pause wash

cycle.

• The power turns off automatically 4

minutes after the pause button is

pressed.

• By turning the Spin dial the spin speed can be chosen

• F10**TD(1~9) / WD-1022*TD

No Spin/No Drain/400/600/800/900/1000

• F12**TD(1~9) / WD-1222*TD

No Spin/No Drain/400/600/800/1000/1200

• F14**TD(1~9) / WD-1422*TD

No Spin/No Drain/400/600/800/1000/1400

• Press the button when reservation washing is needed.
• When the button is pressed, [        ] is displayed, maximum

delay of [        ] hours can be set.

• Each press advances time delay by the hour. 
• Use [Power] button to cancel [Time Delay]
• [Time Delay] means the time required from the present to the

completion of washing.

• The Beep on/off function can be set by pressing and holding

the Time Delay button simultaneously (About 3 seconds).
The Beep on/off function can be set at any time and it is
automatically cancelled in the event of a power cut.
The Beep on/off function also works when power is off.

• Child Lock system can be set and

canceled by pressing and holding
both Medic Rinse button and
Intensive button simultaneously
more than 3 seconds.

• Tub Clean course can be set by

pressing and holding Intensive and
Rinse+ button simultaneously.

• Tub Clean is special cycle to clean

the inside of the washer.

• Medic Rinse : Function that offers more purity in rinse operation by maintaining the optimum

temperature for elimination of remnant detergent. It can be selected in all courses with 
the exception of Quick 30. Hand Wash/Wool, Delicate course.

• Intensive : • If the laundry is heavily soiled “Intensive” option is effective.

• By selecting the Intensive option, the wash time may be extended, depending on the

program selected.

• Rinse + : If you wish to rinse more, the Rinse + option will remove any trace of detergents.

For additional rinse which may assist in removing traces of detergent residue.
By selecting Rinse+ function, the rinse time and the rinse water are increased.

• Pre Wash : If the laundry is heavily soiled, “Pre Wash” course is effective.

Pre Wash is available in Cotton and Synthetic Program.

• Crease Care : If you want to prevent crease, select this button with spin

• Press the button to turn power on

and off.

• Press the button to cancel the time

delay.

- Press Medic Rinse and Rinse+ and Power buttons simultaneously

- Press Time Delay and Medic Rinse simultaneously

• Tub Clean course can be set by

pressing and holding Intensive and
Pre Wash button simultaneously.

• Tub Clean is special cycle to clean

the inside of the washer.