DOWNLOAD LG DD168MWB / DD168MWN Service Manual ↓ Size: 3.19 MB | Pages: 36 in PDF or view online for FREE

• 8 program can be set depending on the type of the

laundry.

• If the power button is pressed, Cotton program is

automatically set.

• By turning the dial, [Cotton–Cotton Quick–Synthetic–

Quick 30–Rinse+Spin–Hand Wash/Wool–Delicate–
Duvet–Baby Care] can be selected.
(The opposite is possible)

• Press the button to select water

temperature.

• 95°C is selected for Cotton and

Baby Care only.

• By pressing the button while

operating the washer, the
present temperature is
displayed.

• Display the estimated remaining time

(Hour : Minute) to finish.

• In case of abnormal operation, error indications are

displayed.

(                                                                    )

• See troubleshooting guide.

• Use the button to start

or pause wash cycle.

• The power turns off

automatically 4 minutes

after the pause button is

pressed.

• If the laundry is heavily

soiled “Intensive”
option is effective.

• By selecting the

Intensive option, the
wash time may be
extended, depending
on the program
selected.

• For additional rinse

which may assist in
removing traces of
detergent residue.

• By selecting

Rinse+ function,
the rinse time and
the rinse water are
increased.

• By turning the Spin dial the spin speed can be chosen

• F10**TD(1~9) / WD-1022*TD

No Spin/No Drain/400/600/800/900/1000

• F12**TD(1~9) / WD-1222*TD

No Spin/No Drain/400/600/800/1000/1200

• F14**TD(1~9) / WD-1422*TD

No Spin/No Drain/400/600/800/1000/1400

• Press the button when delayed washing is needed.
• When the button is pressed, [        ] is displayed, maximum delay of [        ] hours can be set.
• Each press advances time delay by the hour.
• Use [Power] button to cancel [Time Delay]
• [Time Delay] means the time required from the present to the completion of washing.
• The Beep on/off function can be set by pressing and holding the Time Delay button simultaneously (About 3 seconds).

The Beep on/off function can be set at any time and it is automatically cancelled in the event of a power cut.
The Beep on/off function also works when power is off.

• Child Lock system can be set and

canceled by pressing and holding both
[Rinse+ ] and [Pre Wash] buttons
simultaneously more than 3 seconds.

• Tub Clean course can be set by

pressing and holding Rinse+ and Pre
Wash button simultaneously.

• Tub Clean is special cycle to clean the

inside of the washer.

• Function that offers more purity in

rinse operation by maintaining the
optimum temperature for elimination
of remnant detergent. It can be
selected in all courses with the
exception of Quick 30. Hand
Wash/Wool, Delicate course.

• If the laundry is heavily

soiled, “Pre Wash”
course is effective.

• Pre Wash is available

in Cotton, Synthetic
and Baby Care.

• Press the button to turn

power on and off.

• Press the button to cancel

the delay finish.

- Press Rinse+ and Intensive and Power buttons simultaneously

- Press Time Delay and Rinse+ simultaneously

• Tub Clean course can be set by pressing

and holding Intensive and Pre Wash
button simultaneously.

• Tub Clean is special cycle to clean the

inside of the washer.

6. WIRING DIAGRAM / PROGRAM CHART

Medic Rinse : Function that offers more purity in rinse of feracion by maintaining the optimum temperature for

elimination of remnant detergent. It can be selected in all courses with the exception of Quick 30.
Hand wash/Wool, Delicate course.

Intensive : • If the laundry is heavily soiled “Intensive” option is effective.

• By selecting the Intensive option, the wash time may be extended, depending on the program selected.

Rinse+ : If you wish to rinse more, the Rinse+ option will remove any trace of detergents.
Pre Wash : If the laundry is heavily soiled, “Pre Wash” course is effective.

Pre Wash is available in Cotton and Synthetic Program.

Crease Care : If you want to prevent crease, select this button with spin.

7. TROUBLESHOOTING

7-1. BEFORE PERFORMING SERVICE

Be careful of electric shock or disconnecting the parts while trouble shooting.

Voltage of each terminal in 220-240V~ and DC while applying an electric current.

7-2. QC TEST MODE.

1 Refer to the page 10~20.

7-3. HOW TO KNOW THE WATER LEVEL FREQUENCY

Refer to the page 10~20.

2

Press Power with above two buttons pressed and then buzzer will sound.

3 Press the Start/Pause button as follows.

[Press the Start/Pause button more 4 times until stop spinning]

None 

1 time 

2 times 

3 times 

4 times 

5 times 

6 times 

7 times 

8 times 

9 times 

10 times 

All lamps turn on

Clockwise spin (right) 

Low speed Spin 

High speed Spin

Inlet valve for pre-wash operation

Inlet valve for main-wash operation

Hot inlet valve in case of hot water fill

Inlet valve for main-wash operation

Counterclockwise spin (left) 

A Heater is in operation for 3 sec.

Draining pump operation 

Auto off operation

Motor rpm (About 47)

Motor rpm (About 590~650)

Motor rpm (About 950~1050) 

: F10**TD(1~9) / WD-1022*TD

Motor rpm (About 1100~1250) 

: F12**TD(1~9) / WD-1222*TD

Motor rpm (About 1350~1400) 

: F14**TD(1~9) / WD-1422*TD

Water level frequency (225~265)

Water level frequency (225~265)

Water level frequency (225~265)

Motor rpm (About 47)

Water Temperature

Water level frequency

The digits means water level frequency (10

-1

kHz)

ex) 241 : Water level frequency = 241 X 10

-1

kHz

= 24.1kHz