LG CW2079CWD Service Manual ▷ View online
3
6
1. Open the DOOR.
2. Unscrew the 7 screws from the HINGE COVER.
2. Unscrew the 7 screws from the HINGE COVER.
3. Put a flat ( - ) screwdriver into the openng of the hinge, and
pull out the HINGE COVER.
4. Unscrew a screw from the lower side of DOOR.
5. Lift door and remove.
5. Lift door and remove.
HINGE COVER
DOOR ASSEMBLY
1. Open the DOOR and disassemble the CLAMP
ASSEMBLY.
2. Unscrew the 2 screws.
3. Remove connector from DOOR S/W ASSEMBLY.
3. Remove connector from DOOR S/W ASSEMBLY.
DOOR SWITCH
ASSEMBLY
ASSEMBLY
CLAMP
ASSEMBLY
DOOR LOCK SWITCH ASSEMBLY
※
※ Be careful! The door is heavy.
※
※ NOTE
• Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
3
7
PUMP ASSEMBLY
THERMISTOR
1. Disassemble the CABINET COVER
(refer to page 33).
2.
Separate the PUMP HOSE and the BELLOWS
from the PUMP ASSEMBLY.
3. Unscrew 2 screws.
4.
Remove the PUMP ASSEMBLY in arrow
direction.
1. Disassemble the CABINET COVER
(refer to page 33).
2.
Unplug the white connector from the THERMISTOR.
3.
Pull it out by holding the bracket of the THERMISTOR.
1. Disassemble the CONTROL PANEL ASSEMBLY
(refer to page 29).
2. Disassemble the TOP PLATE ASSEMBLY
(refer to page 30).
3. Disassemble two (or three) connectors from
the NOISE FILTER.
4. Unscrew a screw from the TOP BRACKET.
NOISE FILTER
NOISE FILTER
3
8
BACK COVER
SENSOR ASSEMBLY(BALL SENSOR)
1.
Unscrew the 4 screws from the BACK COVER.
2.
Unscrew a screw from the lower-right side of the
CABINET.
3.
Disconnect the connector from PWB HARNESS.
3
9
ROTOR
STATOR
MOTOR ASSEMBLY
DAMPER
1.
Disassemble the BACK COVER.
2.
Remove the bolt.
3.
Pull out the ROTOR.
4.
Unscrew the 2 screws from the tub bracket.
5.
Remove the 6 bolts on the stator.
6.
Unplug the 2 connectors from the STATOR.
1.
Disassemble the CABINET COVER or BACK COVER.
2.
Disassemble the damper hinges from the tub
and base.
3.
Separate the dampers.
※
※ NOTE
• Do not re-use an old damper pin. Always
replace it with a new one.
Click on the first or last page to see other CW2079CWD service manuals if exist.