LG CW2079CW Service Manual ▷ View online
36
PUMP ASSEMBLY
THERMISTOR
1. Disassemble the CABINET COVER
(refer to page 33).
2.
Separate the PUMP HOSE and the BELLOWS
from the PUMP ASSEMBLY.
3. Unscrew 2 screws.
4.
Remove the PUMP ASSEMBLY in arrow
direction.
1. Disassemble the CABINET COVER
(refer to page 33).
2.
Unplug the white connector from the THERMISTOR.
3.
Pull it out by holding the bracket of the THERMISTOR.
1. Disassemble the CONTROL PANEL ASSEMBLY
(refer to page 29).
2. Disassemble the TOP PLATE ASSEMBLY
(refer to page 30).
3. Disassemble two (or three) connectors from
the NOISE FILTER.
4. Unscrew a screw from the TOP BRACKET.
NOISE FILTER
NOISE FILTER
37
BACK COVER
SENSOR ASSEMBLY(BALL SENSOR)
1.
Unscrew the 4 screws from the BACK COVER.
2.
Unscrew a screw from the lower-right side of the
CABINET.
3.
Disconnect the connector from PWB HARNESS.
38
ROTOR
STATOR
MOTOR ASSEMBLY
DAMPER
1.
Disassemble the BACK COVER.
2.
Remove the bolt.
3.
Pull out the ROTOR.
4.
Unscrew the 2 screws from the tub bracket.
5.
Remove the 6 bolts on the stator.
6.
Unplug the 2 connectors from the STATOR.
1.
Disassemble the CABINET COVER or BACK COVER.
2.
Disassemble the damper hinges from the tub
and base.
3.
Separate the dampers.
※
※ NOTE
• Do not re-use an old damper pin. Always
replace it with a new one.
39
11. EXPLODED VIEW
11-1. CABINET & CONTROL PANEL ASSEMBLY
A105
A201
A155
A440
A430
A100
A101
A104
A102
F110
F210
A485
A455
A450
A110
A150
A154
A131
A390
A153
A151
A130
A140
A133
A310
A300
A303
A200
A141
A410
A152
A103
A490
A220
A495
A106
Click on the first or last page to see other CW2079CW service manuals if exist.