DOWNLOAD LG BW-951S / BW-1051S / BW-1052S / BW-1053S Service Manual ↓ Size: 1.67 MB | Pages: 61 in PDF or view online for FREE

■ BW-951S, BW-1052S, BW-1053S

Used for normal loads, this mode
automatically selects the most
appropriate conditions and completes
the sequence in one operation. The
built-in sensor detects the size of the
load and the ideal wash power and
wash, rinse and spin times are set
accordingly

Use this mode when washing
lightly soiled clothes for a short
time. The highly recommended
laundry amount is under 2.0kg.

Use jeans program when washing
heavy, thick, and extremely dirty
laundry such as jeans and work
outfits.

Use this mode to wash normal
clothes or thick and heavy clothes
which are excessively dirty.
Speedy soak mode can be used
with Fuzzy or Jean program.

AUTO OFF

WATER

 LEVEL

DELAY

START

  PRO-

GRAM

  PRO-

GRAM

 PRO-

CESS

 PRO-

CESS

START
PAUSE

WATER

 LEVEL

DELAY

START

  PRO-

GRAM

  PRO-

GRAM

 PRO-

CESS

 PRO-

CESS

START
PAUSE

Select the
Economy
program on the
Control panel.

Add the appropriate
quantity of detergent as
indicated by the water level
next to Water-Detergent.
Or follow the detergent
manufacturer’s instructions

Add the appropriate quantity
of detergent as indicated by
the water level next to Water-
Detergent.
Or follow the detergent
manufacturer’s instructions

Select the Jean
program on the
Control panel.

Select the
Wool program
on the Control
panel.

The Speedy
soak will not
work in Wool &
Economy
program.

Select the

Speedy

soak by

pressing

the Process

button.

Speedy Soak
Wash
Rinse
Spin

Use this program for washing delicate
fabrics such as lingerie and woolens.
(wash only “water washable” clothes)
Before washing your woolens check
the care label for the washing
instructions.
(wash only water washable clothes)

Use neutral detergent
appropriate for the laundry.
When washing woolens
use a mild detergent
recommend- ed for
washing wool.

WATER

 LEVEL

DELAY

START

  PRO-

GRAM

  PRO-

GRAM

 PRO-

CESS

 PRO-

CESS

ST

START

ART

PAUSE

The pulsator rotates for 8
seconds to detect the
laundry load.
Then the water level and the
amount of detergent to be
used will be shown and
water will be supplied.

Water will be supplied for 2
minutes after the start of the
wash to supplement the
water the laundry has
absorbed.

When the wash program
ends, the buzzer will ring
for 10 seconds before the
Power goes off
automatically.

If water is already in the tub, or putting wet
laundry into the tub before starting will increase
the water level.
With lightweight bulky loads, water level can
be set low. 

The water level and the
amount of detergent to
be used will be shown
and water will be
supplied.

When setting the water level manually, do not
set to MEDIUM to prevent damage to laundry.
Washing with hot water may damage the
laundry (Water is set to cold automatically).
Ensure that the load is under 2kg

In order to avoid  damage to laundry, 
the spin cycle may appear slow.
This also avoids wrinkles and clothing may still
contain some water. This is normal.

Speedy soak  Wash cannot be selected for the
Wool and Economy Wash program.

Delay Start (Reservation) Wash is used to delay the finishing time of the operation.
The hours to be delayed can be set by the user accordingly. 
The time on the display is the finishing  time , not  the start time. 

When you press the START/PAUSE button the light
will blink. 

Select the  program for laundry on the Control panel.
This method will not work in Wool Program.

The time changes as following
order (6 

9 

15 

6Hours).

Press the POWER button to turn power on.

Press the PROGRAM button to select the washing program.

Add the laundry and press the START/PAUSE button.

Press the Delay Start (RESERVATION) button to set the time when the
delayed washing is to be completed.

The appropriate quantity of detergent marked next to
the water level of WATER-DETERGENT.
When the lid is open the machine will not operate, and
an alarm signal will remind you to close the lid

Add the detergent.

Water will be supplied for 2 minutes after the start of the wash to
supplement the water the laundry has absorbed.

Close the lid. 

The washing will be finished according to the delayed time.

To select washing program, spinning time, water level or hot/cold  manually, press the Delay Start
(RESERVATION) button and select the desired option. Then press the START/PAUSE button.

Finish

When the laundry cannot be taken out immediately after the wash program ends, it is better to omit
the spinning program . (The laundry will be wrinkled if left for a long time after spinning.)

WATER

 LEVEL

DELA

DELAY

ST

STAR

ART

  PRO-

GRAM

  PRO-

GRAM

 PRO-

CESS

 PRO-

CESS

START
PAUSE

If the lid is open,  the machine will not work, and an alarm  signal will alarm to remind you to close the lid. 

AUTO OFF

When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually

Press the AUTO OFF (Power) button to turn power on.

Press the PROCESS button until above Option Washing light is on.   

When you want to only drain, wait until the water in the washing tub drains
completely and then, turn off the power.  

Add  the laundry into the washing tub.

Press the START/PAUSE button.

Press the WATER LEVEL button, to control the water level according to the amount of
laundry. If you do not choose anything, it is set the LARGE water level automatically.

Add the detergent and close the lid.

• When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not be drained

off, If you wish to drain the water, press the SPIN button and wait until the water in the tub has drained  completely. Then
press the  START/PAUSE button .

• If you do not specify the water level, then Medium will be automatically selected.

• If only Rinse is selected, the process will start from Water Supply.

Wash , Wash+Rinse ,  Rinse ,  Rinse+Spin ,  Spin only options

AUTO OFF