DOWNLOAD LG BW-951S / BW-1051S / BW-1052S / BW-1053S Service Manual ↓ Size: 1.67 MB | Pages: 61 in PDF or view online for FREE

¢”

Changing various functions is possible only in PAUSE state.

Selection button does not work when the washer is in operation (Except for water level, water temp).

WATER

 LEVEL

LEVEL

WATER

TEMP

TEMP.

  PRO-

GRAM

 PRO-

 PRO-

CESS

CESS

START
PAUSE

Speedy Soa
Wash
Rinse
Spin

Ex-Large
Large
Medium
Small

DETERGENT WATER

Warm

Hot

Cold

• Use to adjust the water level as required. The

appropriate amount of detergent is shown next to the
water level in the Water-Detergent diagram

• Water level is automatically selected for fuzzy (normal)

program.
The following settings are indicated as the button is
pushed  Large 

E

Ex-Large 

E

Small 

E

Medium 

E

Large

• 

Use to select water temperature. 
Pressing the button allows you to select
Cold 

E

Warm (Hot&Cold) 

E

Hot 

E

Cold

respectively.  Default setting is Cold.

Use to lock or unlock the control buttons to prevent
settings from being changed by a child.
To lock, push the PROCESS and PROGRAM buttons
simultaneously and to unlock push them one more time
during the washing process.

• Use to select Speedy soak,

Wash, Rinse and Spin functions
as desired.

The control panel may differ according to different models

WATER

 LEVEL

WATER

TEMP.

  PRO-

PRO-

GRAM

GRAM

 PRO-

CESS

START
PAUSE

Fuzzy
Economy
Jean
Wool

k

Hour

9
6

15

AUTO OFF

DELAY
START

• Use for selecting wash program.
• This button allows you to  select 4 different

programs for  different kinds  of laundry and
dirtiness.

• program selections light up in sequence as follows:

FUZZY (NORMAL) 

E

ECONOMY 

E  

JEAN 

E

WOOL 

E  

FUZZY (NORMAL) etc. Select the

desired program by pressing the button.

• Use to start or pause the washing

process.

• Repeats start and pause by pushing the

button.

• The power goes off automatically 10

minutes after stopping.

• Use to set a delayed finishing time.

The time changes 6 

E

9 

E

15(6+9) 

E

6 hour

when the button is pushed.

• Use to turn the power on or off.
• Push again and power goes on or off
• The power goes off automatically about 10

seconds after the wash is finished.

Used for normal loads, this mode

automatically selects the most

appropriate conditions and

completes the sequence in one

operation. The built-in sensor

detects the size of the load and the

ideal wash power and wash, rinse

and spin times are set accordingly

Use this mode when washing
lightly soiled clothes for a short
time. The weight should be under
2.0kg.

Use jeans program when washing
heavy, thick, and extremely dirty
laundry such as jeans and work
outfits.

Use this mode for washing
excessively dirty laundry by soaking
in water for some time to remove
proteins and fats. ‘TURBO(SOAK)’
mode can be used with all washing
programs simultaneously except for
“WOOL & ECONOMY”  program.

Select the

program on

the Control

panel.

Add the appropriat

quantity of deterge

indicated by the wa

level next to WATE

Or follow the deterg

manufacturer’s

instructions

Select the

program on

the Control

panel.

Select the

program on

the Control

panel.

The TURBO

(SOAK)  will not

work in WOOL  &

Program.

Keep pressing the PROCESS button until the TURBO/SOAK light is on and
then  WASH, RINSE, SPIN lights are on simultaneously.
If necessary, select the desired washing process from

(TURBO/SOAK+WASH+RINSE+SPIN), (TURBO/SOAK+WASH+
RINSE),  (TURBO/SOAK+WASH) manually.

TURBO(SOAK)

Use this program for washing
delicate fabrics such as lingerie and
woolens.
(wash only “water washable” clothes)
Before washing your woolens check
the care label for the washing
instructions.(wash only water
washable clothes)

Use neutral deterg

appropriate for the

laundry.

When washing

woolens use a mild

detergent

recommended for

washing wool.

AUTO OFF

The pulsator rotates for 8 seconds
to detect the laundry load.
Then the water level and the
amount of detergent to be used
will be shown and water will be
supplied.

Water will be supplied
for 2 minutes after the
start of the wash to
supplement the water
the laundry has
absorbed.

When the wash
program ends, the
buzzer will ring for 10
seconds before the
Power goes off
automatically.

If water is already in the tub, or putting wet
laundry into the tub before starting will
increase the water level.
With lightweight bulky loads, water level
can be set low. 
Changes to water temperature (hot/cold)
and wash level are possible during
operation.   

The water level and the
amount of detergent to be
used will be shown and
water will be supplied.

When setting the water level manually,
do not set to MEDIUM to prevent
damage to laundry.
Washing with hot water may damage
the laundry (Water is set to cold
automatically). Ensure that the load is
under 2kg

In order to avoid  damage to laundry, 
the spin cycle may appear slow.
This also avoids wrinkles and clothing
may still contain some water. This is
normal.

Turbo(Soak)/ Wash cannot be selected
for the Wool Wash program.

e

nt as

ater

gent

gent

d