LG AWD-12312RD Service Manual ▷ View online
3
2
① Disassemble the 4 connectors from the valves.
② Unscrew the 2 screws from the back of the
cabinet.
Wire color
2
1
3
4
INLET VALVE
VALVE
(DRY)
YL - BK
VALVE
(BLEACH)
GY - BK
VALVE
(MAIN WASH)
WH/ - BK
VALVE
(HOT)
BL - BK
① Open the door.
② Unscrew the 2 screws from the Cabinet Cover.
③ Disassemble the door upward.
※ When removing the Door Assembly, it is
necessary to hold the Bracket that is inside of
the Cabinet Cover.
the Cabinet Cover.
Drain in to bucket by pulling out hose and
removing cap.
removing cap.
CAP
(REMAINING HOSE)
DOOR
Method of removing remaining water
3
3
① Disassemble the clamp assembly.
② Unscrew the 2 screws from cabinet cover.
③ Unscrew the screw from filter cover.
④ Put a flat ( - ) screwdriver or putty knife into
the both sides of the filter cover, and pull it
out.
out.
⑤ Unscrew the 2 screws from the lower side of
the cabinet cover.
⑥ Unscrew the 2 screws from upper part of the
cabinet cover.
GASKET ASSEMBLY
3
4
⑦ Disassemble the clamp assembly.
⑧ Remove dry gasket clamp by loosening the
screw.
⑨ When reassembling the gasket, put the drain
hole of the gasket downward.
Drain Hole
Tub Gasket
Clamp
Clamp
3
5
① Disassemble the back cover.
② Remove the bolt.
③ Pull out the Rotor.
③ Unscrew the 2 screws from the tub bracket.
④ Remove the 6 bolts on the stator.
⑤ Unplug the 2 connectors from the stator.
⑥ Disassemble the damper hinges from the tub
and base.
⑦ Separate the dampers.
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
Rotor
Bolt
Friction
Damper
Damper
Hinge
(Damper)
(ROTOR ASSEMBLY)
(STATOR ASSEMBLY)
(FRICTION DAMPER)
HOW TO ASSEMBLE THE MOTOR
NOTE
Once removed, replace the damper pin with new
one.
one.
Click on the first or last page to see other AWD-12312RD service manuals if exist.