LG 48842800 Service Manual ▷ View online
6
3. PARTS IDENTIFICATION
Lower Cover Cap
Drain Pump Filter
Drain Plug
Drain Plug
Shipping Blots
Power Plug
Power Plug
Air Vent Safety
Hot Water Inlet
Cold Water Inlet
• If the supply cord is
damaged, it must be
replaced by the
manufacturer or its
authorized service
technician in order to
avoid a hazard.
replaced by the
manufacturer or its
authorized service
technician in order to
avoid a hazard.
Hot/Cold(1 each)
Hose
Wrench
Tie strap
to secure drain hose to standpipe
inlet hose, or laundry tub
Drain Hose
Dispenser
Control panel
Door
Drum
Ajustable Feet
ACCESSORIES
7
4. INSTALLATION
Before servicing, ask the customer what the trouble is.
Check the setup (power supply is 120V AC, remove the transit bolts, level the washer....).
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
Check the setup (power supply is 120V AC, remove the transit bolts, level the washer....).
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
STANDARD INSTALLATION
The appliance should be installed as follows:
1
2
3
4
5
6
6
REMOVE THE TRANSIT
BOLTS
• Remove the transit bolts
(4 EA: ) with the supplied wrench.
•
Turn the leveling feet to adjust
the appliance horizontally.
the appliance horizontally.
•
The appliance goes up by
rotating the feet clockwise.
rotating the feet clockwise.
•
The appliance come down by
rotating the feet counterclockwise.
rotating the feet counterclockwise.
• Keep the transit bolts and
spanner for future use.
• Insert the 4 caps
(provided) into the hole.
ADJUST THE
LEVELING
INSTALL THE APPLIANCE
ON A FLAT AND FIRM SURFACE
1
8
Verify that the rubber washer is inside of the
valve connector.
Connect the inlet hose firmly to prevent leaks.
HOW TO CONNECT THE INLET HOSE
CONNECT THE DRAIN HOSE
· Make sure that the hose is not twisted.
CONNECT POWER PLUG
The end of the drain hose should be placed less than 96”from the floor.
· Avoid submerging the end of the hose.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices, as
doing so may cause a fire.
9
TEST OPERATION
1
Preparation for
washing.
washing.
• Connect the power plug to
the outlet.
• Connect the inlet hose.
3
Press the Start/Pause
button.
button.
•
Listen for clicking sounds to
determine if the door has
locked.
determine if the door has
locked.
6
Check the water heating
function.
function.
•
Press the WASH / RINSE button
and the present temperature will
be displayed.
and the present temperature will
be displayed.
•
Make sure that the drum rotates
clockwise and counterclockwise.
clockwise and counterclockwise.
5
Check the automatic
reversing rotation of the
drum.
reversing rotation of the
drum.
4
Check the water supply.
•
Verify that if water is supplied
through the detergent dispenser.
through the detergent dispenser.
7
Check the drain and spin
functions.
functions.
•
Press the POWER button twice
to restart.
to restart.
•
Press the SPIN SPEED button.
•
Press the START / PAUSE
button.
button.
•
Check the drain and spin
functions.
functions.
8
Press the
START / PAUSE button.
START / PAUSE button.
9
Water removal.
•
If SVC is required, remove the
remaining water in the tub, by
pulling out the drain plug.
remaining water in the tub, by
pulling out the drain plug.
2
Press the POWER button.
•
Listen for clicking sounds to
determine if the door is
unlocking.
determine if the door is
unlocking.
7
Click on the first or last page to see other 48842800 service manuals if exist.