DOWNLOAD LG 48842800 Service Manual ↓ Size: 6.84 MB | Pages: 51 in PDF or view online for FREE

2. FEATURES & TECHNICAL EXPLANATION

2-1. FEATURES

The advanced Brushless DC motor directly drives the drum without
belt and pulley.

Tilted drum and large opening make it possible to load
and unload clothing more easily.

Detergent, fabric softener and bleach are dispensed separately at
the right time during wash cycle.  

The Child lock prevents children from pressing any button to
change the settings during operation.

Automatically detects the load and optimizes the washing time.

The internal heater automatically heats the water to the optimum
temperature on selected cycles.

2-2. NEURO FUZZY WASHING TIME OPTIMIZATION

To get the best washing performance, optimal time is determined by the water temperature,
the selected washing temperature, and the size of the load.

washing time

rinsing time

the best
washing
performance

spin rhythm, time

SENSING

EFFECT

PROCESSING

DETERMINATION

2-3. WATER LEVEL CONTROL

This model incorporates a pressure sensor which can sense the water level in the tub. 

The water supply is stopped when the water level reaches the preset level, the washing  program

then proceeds. 

Spinning does not proceed until the water in the tub drains to a certain level.

2-4. DOOR CONTROL

The door can be opened by pulling the door handle whenever washer is not in operation.

When the cycle is completed, the DOOR LOCKED light will turn off.

If a power failure has occurred while in operation, the door will unlock after 5 minutes.

Clicking sounds can be heard when the door is locked/unlocked.

2-5. THE DOOR CAN NOT BE OPENED

While program is operating

When a power failed and power plug is taken out in operation

While Door Lock lights turn on.

White the motor is in the process of intertial rotating, through the operation is paused.

2-6. DOOR LOCKED LAMP LIGHTS

When the frequency of water level is lower than 22.9 kHz

(It can be canceled when the frequency is more than 23.8 kHz)

When the temperature inside the tub is higher than 45 °C and water level is not 25.5 kHz

(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40 °C)

2-7. CHILD LOCK

Use this option to prevent unwanted use of the washer. Press and hold OPTION button for 3 seconds

to lock/unlock control. 

When child lock is set, “      ” blinks and all buttons are disabled except the Power       button. 

You can lock the controls of the washer while washing.

3. PARTS IDENTIFICATION

• If the supply cord is

damaged, it must be
replaced by the
manufacturer or its
authorized service
technician in order to
avoid a hazard.

Hot/Cold(1 each)

Hose

Wrench

Tie strap

to secure drain hose to standpipe

inlet hose, or laundry tub

ACCESSORIES

4. INSTALLATION 

Before servicing, ask the customer what the trouble is.
Check the setup (power supply is 120V AC, remove the transit bolts, level the washer....).
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly  instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.

STANDARD INSTALLATION

The appliance should be installed as follows:

REMOVE THE TRANSIT

BOLTS

• Remove the transit bolts

(4 EA:     ) with the supplied wrench.

•

Turn the leveling feet to adjust
the appliance horizontally.

•

The appliance goes up by
rotating the feet clockwise. 

•

The appliance come down by
rotating the feet counterclockwise.

• Keep the transit bolts and 

spanner for future use.

• Insert the 4 caps  

(provided) into the hole.

ADJUST THE

LEVELING

INSTALL THE  APPLIANCE

ON A FLAT AND FIRM SURFACE

1