LG 40518 Service Manual ▷ View online
5
2
5
Open the door.
6
Disassemble the clamp assembly.
7
Tilt the cabinet cover.
8
Disconnect the door switch connector.
9
Lift and separate the cabinet cover.
10
Disassemble the clamp assembly.
11
Disassemble the gasket.
NOTE: When assembling the CABINET
COVER, connect the door switch connector.
53
Open the door.
Unscrew the 6 screws from the HINGE COVER.
Put a flat ( - ) screwdriver into the openng of the hinge,
and pull out the hinge cover.
DOOR
Open the door and disassemble the CLAMP
ASSEMBLY.
Unscrew the 2 screws.
DOOR LOCK SWITCH ASSEMBLY
NOTE
¥ Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
PUMP
Disassemble the cabinet cover.
Separate the pump hose, the bellows and the
circulation hose assembly from the pump
assembly.
Disassemble the pump assembly in arrow
direction.
CIRCULATION
HOSE
PUMP HOSE
BELLOWS
1
2
3
WHEN FOREIGN OBJECT IS STUCK BETWEEN DRUM AND TUB
Disassemble the cabinet cover.
Separate the heater from the tub.
Remove any foreign objects (wire, coin, etc.)
by inserting a long bar in the opening.
1
2
3
54
HEATER
Disassemble the cabinet cover.
Separate 2 connectors from the heater.
Loosen the nut and pull out the heater.
THERMISTOR
Disassemble the cabinet cover.
Unplug the white connector from the
thermistor.
Pull it out by holding the bracket of the
thermistor.
CAUTION
• When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
• Tighten the fastening nut so the heater is
secure.
1
2
3
1
2
3
(2)
(1)
55
MOTOR/DAMPER
1
Disassemble the back cover.
2
Remove the bolt.
3
Pull out the Rotor.
1
Unscrew the 2 screws from the tub bracket.
2
Remove the 6 bolts on the stator.
3
Unplug the 2 connectors from the stator.
1
Disassemble the damper hinges from the tub and
base.
NOTE
If you pull the dampers apart, the must be
replaced. If you do not separate them, they
can be re-used.
Click on the first or last page to see other 40518 service manuals if exist.