LG 31512 Service Manual ▷ View online
17
Soil Level
• Allows a selection to be
make for the strength of the
wash action.
• Power option selections light
up insequence as follows
Normal ▶ Heavy ▶ Light
▶ Normal as the button is
▶ Normal as the button is
pushed.
This can be selected for any
program.
• Adjustment can be made
while washing.
• Default SOIL LEVEL is
Normal.
Wash Temp.
• Select to select Wash
Temperature.
• Pressing the button allows
The selection of
Tap Cold ▶ Cold ▶ Eco
Warm ▶ Warm ▶ Hot
respectively. Default
setting is Warm.
• Delayed finishing time.
• The time increases when the button is pushed.
• The following settings are indicated as the button is
pushed 1 ▶ 2 ▶3 ▶ 4 ▶ ... 17 ▶ 18 ▶ 19▶
▶ Reservation off ▶ 1 ...
▶ Reservation off ▶ 1 ...
• To cancel delay time, turn the power switch off or
push DELAY WASH button until off.
Delay Wash (Selection)
BUTTON
• Causes the
dispensing of
fabric softener in
the final rinse
cycle.
Fabric
Softener
START/ PAUSE BUTTON
• Use to start or pause the wash
cycle.
Changes while be made to the
wash settings while the machine is
paused.
• Repeats start and pause by
pushing the button.
CYCLE BUTTON
• Use for selecting wash program.
• This button allows the selection of
10 different programs for different
kinds of laundry and dirtiness.
• Program selections light up in
sequence as follows:
Normal/Casual ▶Heavy Duty
▶Bulky/Bedding ▶Whites
▶Rinse/Spin ▶Express Wash
▶Handwash/Wool ▶ Delicates
▶Bulky/Bedding ▶Whites
▶Rinse/Spin ▶Express Wash
▶Handwash/Wool ▶ Delicates
select the desired program by
ressing the button.
• MYCYCLE allows you to
store a customized wash
cycle for future use. It allows
you to save favorite tempera-
ture, spin speed, soil level,
and other options for a
cycle,and then recall them at
the touch of a button.
My Cycle
• Before washer is
operating. Use when
you want only spin,
While washer is
operating. If you
press 5second.all
controls except
CONTROL LOCK
and POWER buttons
will be disabled. If
you want to
deactivate. press it
again 5second
Drain & Spin/
Control Lock
Stain
boost
Eco warm
Hot
Eco warm
Cold
Tap cold
Hot
Eco warm
Cold
Tap cold
3-4. WASHING PROGRAMS.
18
19
Stain
boost
Eco warm
Cold
Tap cold
Warm
Eco Warm
Cold
Warm
Eco warm
Tap cold
Tap Cold
3-5. CARE AND MAINTENANCE
20
When there is the possibility of freezing temperatures
• Close the water taps and remove the water supply hoses.
• Remove the water which remains in the water supply.
• Lower the drain hose and drain the water in the sump and the drain hose by running a spin cycle.
Cleaning the inside of your washer
If you use fabric softener or do regular COLD water washing, it is very important that you
clean the inside of your washer occasionally as described below.
• Fill your washer with HOT water.
• Add 1 cup of bleach.
• Let it operate for several minutes.
• Stop the washer, open the lid, and leave it to soak overnight.
• After soaking, drain the washer and run it through a normal cycle.
Products that might damage your washing machine
• Concentrated bleaches and diaper sanitizer will cause damage to the paintwork and components of
your washer.
• Hydrocarbon solvents, i.e. petrol, paint thinners and lacquer thinners, etc. can dissolve plastic and
blister paint.
(Be careful when washing garments stained with these solvents as they are flammable, DO NOT put
them in washer or dryer.)
• Some pretreatment sprays or liquids can damage your washer’s control panel.
• Use of dyes in your washer may cause staining of the plastic components. The dye will not damage
the machine but we suggest you thoroughly clean your washer afterwards. We do not recommend
the use of dye strippers in your washer.
• Do not use your washer lid as a work surface.
If frozen
• Remove the water supply hose and immerse it in HOT water. (40° C or 104° F).
• Pour approximately 2 liters (4½ pounds ) of HOT water (40° C or 104° F) into the sump and allow it ti stand for
at least 10 minutes.
• Connect the water supply hose to the water tap run a SPEED WASH cycle to confirm that the machine fills,
drains, and operates properly.
Wash Inner-Tub
Leave the lid open after washing to allow moisture to evaporate. If you
want to clean the inner-tub use a clean soft cloth dampened with liquid
detergent, then rinse. (Do not use harsh or gritty cleaners.)
Inlet Hoses
Hoses connecting washer to faucet should be replaced every 5 years.
Exterior
Immediately wipe off any spills. Wipe with damp cloth. Avoid hitting surface with sharp
objects.
Long Vacations
Be sure water supply is shut off at faucets. Drain all water from hoses if weather will be
below freezing.
Click on the first or last page to see other 31512 service manuals if exist.