Panasonic SB-PC680P Service Manual ▷ View online
Type
2 way, 3 speaker system (Bass-ref.)
Speaker unit(s)
Impedance 6
Ω
Full range
6.5 cm (2-1/2”) Cone type
Full range
6.5 cm (2-1/2”) Cone type
Super tweeter
Piezo type
Input power (IEC)
160 W* (Max)
Output sound pressure level
83 dB/W (1.0 m)
Cross over frequency
10 kHz
Frequency range
103 Hz - 25 kHz (-16 dB)
116 Hz - 22 kHz (-10 dB)
Dimensions (W x H x D)
320 mm x 88 mm x 96 mm
(12-19/32” x 3-15/32” x 3-25/32”)
Mass
1.3 kg (2.9 lbs)
*Rating with low cut filter equipped amplifier.
Notes :
1 Disassembly Process
2
1.1.
Disassembly of the Front Panel
2
1.2.
Disassembly of the Woofer Speaker 1
2
1.3.
Disassembly of the Woofer Speaker 2
3
1.4.
Disassembly of the Piezo Speaker
3
1.5.
Disassembly of the Terminal
3
2004 Co. .
SB-PC680P
Colour
(S)... Silver Type
1. Specifications are subject to change without notice.
2.
Mass and dimensions are approximate.
n System : SC-HT680P-S
Music Center : SA-HT680P-S
Speaker System : SB-HT680P-S
Active Subwoofer : SB-W680P-S
n System : SC-HT680PC-S
Music Center : SA-HT680PC-S
Speaker System : SB-HT680P-S
Active Subwoofer : SB-W680P-S
n System : SC-HT680PL-S
Music Center : SA-HT680PL-S
Speaker System : SB-HT680P-S
Active Subwoofer : SB-W680P-S
SB-HT680P-S consists of : SB-FS680P-S (x 2), SB-FS681P-S (x 2)
and SB-PC680P-S (x 1)
2 Connection of the Speaker Cables
5
3 Connection of Wiring Diagram
5
4 Cabinet Parts Location
6
5 Replacement Parts List
7
6 Packaging (SB-HT680P-S)
8
Speaker System
Specification
CONTENTS
Page
Page
ORDER NO. MD0412602C7
A6
1.1. Disassembly of the Front
Panel
Step 1: Remove 8 screws from the Rear Cabinet Assembly.
Step 2: Push the Front Panel forward to detach from the Rear
Cabinet Assembly as arrow shown.
Cabinet Assembly as arrow shown.
1.2. Disassembly of the Woofer
Speaker 1
Repeat step 1 to step 2 in Item 1.1.
Step 1: Detach the wires (+) red and (-) blue from the Woofer
Speaker 1.
Speaker 1.
Step 2: Remove 4 screws from the Woofer Speaker 1.
1 Disassembly Process
2
SB-PC680P
1.3. Disassembly of the Woofer
Speaker 2
Repeat step 1 to step 2 in item 1.1.
Step 1: Detach the wires (+) black and (-) gray from the Woofer
Speaker 2.
Speaker 2.
Step 2: Remove 4 screws from the Woofer Speaker 2.
1.4. Disassembly of the Piezo
Speaker
Repeat step 1 to step 2 in item 1.1.
Step 1: Remove the glue from the Piezo Speaker.
Step 2: Disconnect the Network Assembly.
Step 2: Disconnect the Network Assembly.
1.5. Disassembly of the Terminal
Repeat step 1 to step 2 in item 1.1.
Step 1: Detach the wires (+) red and (-) gray from the Terminal.
3
SB-PC680P
Step 2: Remove 1 screw from the Terminal.
Step 3: Remove the Terminal from the Rear Cabinet
Assembly.
Assembly.
4
SB-PC680P
Display