DOWNLOAD LG 29278 Service Manual ↓ Size: 9.35 MB | Pages: 46 in PDF or view online for FREE

Adding Detergent

Add measured detergent to the detergent compartment of the
dispenser drawer.

Detergent is flushed through the dispenser at the beginning of
the wash phase. Either powdered or liquid detergent can be
used, but the drawer insert must be removed to use powder. 

Detergent usage may need to be adjusted for water
temperature, water hardness, size and soil level of the load.
Avoid using too much detergent in your washer, as it can lead
to oversudsing and detergent residue being left on the clothes.

Adding Fabric Softener

Pour the recommended amount of liquid fabric
softener into the left-hand compartment. Use only liquid fabric
softener.

Dilute with water to the maximum fill line.

Overfilling can cause early dispensing of the fabric softener,
which could stain clothes.

NOTE: Do not pour fabric softener directly on the wash load.

It may stain the clothes.

Adding Wash Boost Additives

The Wash Boost dispenser may be used to clean heavily soiled
or stained garments more efficiently.

If desired, place the additives for the wash boost setting in the
right-hand compartment. Use only liquid additives.

Overfilling can cause early dispensing of presoak additives,
which could result in damaged clothes.

NOTE : Do not pour additives directly on the wash load. It may stain the clothes.

Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid,or products
containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.

To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:

• Read and comply with all instructions on stain removal products.
• Keep stain removal products in their original labeled containers and out of children's reach.
• Thoroughly wash any utensil used.
• Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
• Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents, or

other flammable or explosive substances because they give off vapors that could ignite or explode.

• Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.

• Remove stains promptly.
• Determine the kind of stain, then follow the recommended treatment in the stain removal

chart below.

• To pretreat stains, use a prewash product, liquid detergent, or a paste made from

granular detergent and water.

• Use COLD water on unknown stains because HOT water can set stains.
• Check care label instructions for treatments to avoid on specific fabrics.
• Check for colorfastness by testing stain remover on an inside seam.
• Rinse and wash items after stain removal.

Adhesive tape, chewing
gum, rubber cement

Baby formula, dairy
products, egg

Beverages (coffee, tea, soda,
juice,alcoholic beverages)

Blood

Candle wax, crayon

Chocolate

Collar or cuff soil, cosmetics

Dye transfer on white fabric

Grass

Grease, oil, tar (butter, fats,
salad, dressing, cooking oils,
car grease, motor oils)

Ink

Mildew, scorch

Mud

Mustard, tomato

Nail polish

Paint, varnish

Rust, brown or yellow
discoloration

Shoe polish

Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with
prewash stain remover or nonflammable dry cleaning fluid.

Use product containing enzymes to pretreat or soak stains.

Pretreat stain. Wash using COLD water and bleach safe for fabric.

Soak the item in a bowl of COLD water for at least 30 minutes. Then launder as usual. 

Remove all surface wax. Put the garment in the freezer for a couple of hours, then
remove and break away as much wax as possible. Try a commercial removal product
like Goo-Gone, Goop, or Go-Jo cleaner for the remaining wax stains. DO NOT
ATTEMPT TO REMOVE WITH HEAT!

Pretreat or soak in WARM water using product containing enzymes. Wash using bleach
safe for fabric.

Pretreat with prewash stain remover or rub with bar soap.

Use packaged color remover. Wash using bleach safe for fabric.

Pretreat or soak in WARM water using product containing enzymes. Wash using bleach
safe for fabric.

Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy
stains and tar, apply nonflammable dry cleaning fluid to back of stain. Replace towels
under stain frequently. Rinse throughly. Wash using hottest water safe for fabric.

Some inks may be impossible to remove. Washing may set some inks. Use prewash
stain remover, denatured alcohol, or nonflammable dry cleaning fluid.

Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and HOT water
before washing. Badly mildewed fabrics may be permanently damaged.

Brush off dry mud. Pretreat or soak with product containing enzymes.

Pretreat with prewash stain remover. Wash using bleach safe for fabric.

May be impossible to remove. Place stain face down on paper towels. Apply nail polish
remover to back of stain.
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.

WATER BASED Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it
cannot be removed,
OIL BASED AND VARNISH Use solvent recommended on can label. Rinse throughly
before washing.

For spots, use rust remover safe for fabric. For discoloration of an entire load, use
phosphate Detergent and nonchlorine bleach. Do not use chlorine bleach because it
may intensify discoloration.

LIQUID Pretreat with a paste of granular detergent and water. Paste scrape residue
from fabric. Pretreat with prewash stain remover or nonflammable dry cleaning fluid.
Rub detergent into dampened area. Wash using bleach safe for fabric.

STAIN TREATMENT

The time shown on the display is the estimated cycle time. If the sensors and microprocessor elect to
make changes during the cycle, the display will be adjusted accordingly. 

The following settings are

indicated as the button is

pushed SOAK ▶ SPIN ONLY
▶ RINSE+SPIN

Select NORMAL/CASUAL,

HEAVY/DUTY or TOWLES

as the button is pushed SOAK
▶ STAIN CARE ▶ SPIN ONLY
▶ RINSE+SPIN

Spin speed can

be selected from

No Spin to Extra

high.  Default is

Low. 

(refer to  page

24)

Gives additional soak time.

A buildup of detergent residue can occur in the wash

tub over time and can lead to a mildewy or musty

odors.The CLEAN WASHER cycle is specially designed

to remove this buildup using bleach or other cleaner

designed specifically for cleaning washers. The CLEAN

WASHER cycle should be run once a month,or more

often under heavy use conditions or if odor is present.  

Power on.

Push again, power goes off

Power goes off automatically after

the wash is finished.

After turning the power on, the

unit will automatically turn off if

nothing is selected.

Use this option to wash loads with

multipletypes of soils.  With this option,

the water temperature is raised in three

steps to optimize cleaning performance.

During the final wash step, the water is

heated and maintained at the highest

temperature for that cycle for 10 minutes. 

This option saves energy

by using cooler

temperatures and different

operations to help maintain

washer performance while

reducing energy

consumption. 

Add A Garment light tell you when you can load

additional laundry. Light will on, you can. light off,

you can add,but we don’t recommend Chime

Press the button to change the volume of the

chime. The chime will sound at the new volume

with each press of the button. When no chime is

heard, the chime is off. The volume settings are

LOW - HIGH - OFF.

This option will add an extra rinse to the selected

cycle. Use this option to help ensure the removal

of detergent or bleach residue from fabrics.

Pressing the EXTRA RINSE button twice will add

two additional rinses to the cycle. Water plus

When it work,you pause it. if you press this button

second. water quantity is increase.