47LM8600 (CHASSIS:LT23E) — LG TV Service Manual (repair manual)

Model
47LM8600 (CHASSIS:LT23E)
Pages
62
Size
7.07 MB
Type
PDF
Document
Service Manual
Brand
Device
TV / LCD
File
47lm8600-chassis-lt23e.pdf
Date

View LG 47LM8600 (CHASSIS:LT23E) Service Manual online

P/NO : MFL67443403 (1204-REV00)
CHASSIS : LT23E
MODEL : 47LM8600   
47LM8600-DA
CAUTION
BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
LED LCD TV
SERVICE MANUAL
- 2 -
CONTENTS
CONTENTS  .............................................................................................. 2
PRODUCT SAFETY  ................................................................................. 3
SPECIFICATION ....................................................................................... 4
ADJUSTMENT INSTRUCTION ................................................................ 9
TROUBLE SHOOTING ............................................................................19
BLOCK DIAGRAM .................................................................................. 19
EXPLODED VIEW  .................................................................................. 27
SCHEMATIC CIRCUIT DIAGRAM  ..............................................................
- 3 -
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by      in the 
Schematic Diagram and Exploded View.
It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent 
Shock, Fire, or other Hazards. 
Do not modify the original design without permission of manufacturer.
General Guidance
An 
isolation  Transformer  should  always  be  used  during  the 
servicing of a receiver whose chassis is not isolated from the AC 
power  line.  Use  a  transformer  of  adequate  power  rating  as  this 
protects  the  technician  from  accidents  resulting  in  personal  injury 
from electrical shocks.
It  will  also  protect  the  receiver  and  it's  components  from  being 
damaged  by  accidental  shorts  of  the  circuitry  that  may  be 
inadvertently introduced during the service operation.
If  any  fuse  (or  Fusible  Resistor)  in  this  TV  receiver  is  blown, 
replace it with the specified.
When replacing a high wattage resistor (Oxide Metal Film Resistor, 
over 1 W), keep the resistor 10 mm away from PCB.
Keep wires away from high voltage or high temperature parts.
Before returning the receiver to the customer, 
always  perform  an 
AC  leakage  current  check  on  the  exposed 
metallic parts of the cabinet, such as antennas, terminals, etc., to 
be  sure  the  set  is  safe  to  operate  without  damage  of  electrical 
shock. 
Leakage Current Cold Check(Antenna Cold Check)
With the instrument AC plug removed from AC source, connect an 
electrical  jumper  across  the  two AC  plug  prongs.  Place  the AC 
switch in the on position, connect one lead of ohm-meter to the AC 
plug prongs tied together and touch other ohm-meter lead in turn to 
each  exposed  metallic  parts  such  as  antenna  terminals,  phone 
jacks, etc. 
If  the  exposed  metallic  part  has  a  return  path  to  the  chassis,  the 
measured resistance should be between 1 M
Ω and 5.2 MΩ. 
When  the  exposed  metal  has  no  return  path  to  the  chassis  the 
reading must be infinite.
An  other  abnormality  exists  that  must  be  corrected  before  the 
receiver is returned to the customer.
Leakage Current Hot Check 
(See below Figure) 
Plug the AC cord directly into the AC outlet.
Do not use a line Isolation Transformer during this check. 
Connect 1.5 K / 10 watt resistor in parallel with a 0.15 uF capacitor 
between  a  known  good  earth  ground  (Water  Pipe,  Conduit,  etc.) 
and the exposed metallic parts.
Measure  the AC  voltage  across  the  resistor  using AC  voltmeter 
with 1000 ohms/volt or more sensitivity.
Reverse plug the AC cord into the AC outlet and repeat AC voltage 
measurements  for  each  exposed  metallic  part.  Any  voltage 
measured must not exceed 0.75 volt RMS which is corresponds to 
0.5 mA.
In  case  any  measurement  is  out  of  the  limits  specified,  there  is 
possibility  of  shock  hazard  and  the  set  must  be  checked  and 
repaired before it is returned to the customer.
Leakage Current Hot Check circuit 
IMPORTANT SAFETY NOTICE
SAFETY PRECAUTIONS
- 4 -
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This spec sheet is applied to the LCD TV used LT23E chassis.
2. Test condition
Each part is tested as below without special notice.
1) Temperature : 25 ºC ± 5 ºC (77 ºF ± 9 ºF), CST : 40 ºC±5 ºC
2) Relative Humidity: 65 % ± 10 %
3) Power Voltage :  Standard  input  voltage  ([email protected] 
50/60Hz)
4)  Specification  and  performance  of  each  parts  are  followed 
each  drawing  and  specification  by  part  number  in 
accordance with BOM.
5)  The receiver must be operated for about 5 minutes prior to 
the adjustment.
3. Test method
1) Performance: LGE TV test method followed 
2) Demanded other specification 
- Safety : CE, IEC specification
- EMC : CE, IEC 
4. General Specification
No
Item
Specification
Remark
1.
Display Screen Device
54.64” Color Active Matrix LCD Module
46.96” Color Active Matrix LCD Module
46.96” Color Active Matrix LCD Module
72.07” Color Active Matrix LCD Module
LC550DUT-SEF1(55LM9600-DA)
LC470DUT-SEF1(47LM9600-DA)
LC470EUH-KEF1(47LM8600-DA)
LC720DUC-SDF1(72LM9500-DA)
2.
Aspect Ratio
16:9
All
3.
LCD Module
54.64” WUXGA diagonal LCD
46.96” WUXGA diagonal LCD
46.96” WUXGA diagonal LCD
72.07” WUXGA diagonal LCD
LC550DUT-SEF1(55LM9600-DA)
LC470DUT-SEF1(47LM9600-DA)
LC470EUH-KEF1(47LM8600-DA)
LC720DUC-SDF1(72LM9500-DA)
4.
Operating Environment
TFT
1) Temp. : 0 ~ 40 deg
2) Humidity : 0 ~ 85%
LGE SPEC
ALEF
Temp.   : 0 ~ 50 deg
Humidity : 20 ~ 90%
5.
Storage Environment
TFT
Temp.   : -20 ~ 60 deg
Humidity : 10 ~ 90%
LGE SPEC
ALEF
Temp.   : -20 ~ 60 deg
Humidity : 10 ~ 90%
6.
Input Voltage
AC100 ~ 240V, 50/60Hz
7.
Power Consumption(Max) = 
LCD(Module) + Backlight(LED)
T480
54.64” 190
W
LC550DUT-SEF1(55LM9600-DA)
46.96” 81
W
LC470DUT-SEF1(47LM9600-DA)
72.07” 385
W
LC720DUC-SDF1(72LM9500-DA)
T240
46.96” 129
W
LC470EUH-KEF1(47LM8600-DA)
- 5 -
8.
LCD Module
Size
Maker
Inch
(H) × (V) × (D)
LGD
54.64”
1217 x 689.9 x 1.5
LC550DUT-SEF1(55LM9600-DA)
46.96”
1046.68 x 594.02 x1.5 LC470DUT-SEF1(47LM9600-DA)
46.96”
1059.5 x 616.2 x 20.7 LC470EUH-KEF1(47LM8600-DA)
72.07”
1666.0 x 968.0 x 54.0 LC720DUC-SDF1(72LM9500-DA)
Pixel Pitch
Maker
Inch
(H) × (V) × (D)
LGD
47”
0.5415 x 0.5415
LC470DUT-SEF1(47LM9600-DA)
55”
0.630 x 0.630
LC550DUT-SEF1(55LM9600) ALEF 3D-PG T480
47”
0.5415 x 0.5415
LC470EUH-KEF1(47LM8600-DA)
72.07”
0.831 x 0.831
LC720DUC-SDF1(72LM9500-DA)
Back Light
LGD
54.64”
ALEF
LC550DUT-SEF1(55LM9600) ALEF 3D-PG T480
46.96”
ALEF
LC470DUT-SEF1(47LM9600-DA)
46.96”
EDG-LED
LC470EUH-KEF1(47LM8600-DA)
72.07”
EDG-LED
LC720DUC-SDF1(72LM9500-DA)
4. General Specification
No
Item
Specification
Remark
1.
Display Screen Device
54.64” Color Active Matrix LCD Module
46.96” Color Active Matrix LCD Module
46.96” Color Active Matrix LCD Module
72.07” Color Active Matrix LCD Module
LC550DUT-SEF1(55LM9600-DA)
LC470DUT-SEF1(47LM9600-DA)
LC470EUH-KEF1(47LM8600-DA)
LC720DUC-SDF1(72LM9500-DA)
2.
Aspect Ratio
16:9
All
3.
LCD Module
54.64” WUXGA diagonal LCD
46.96” WUXGA diagonal LCD
46.96” WUXGA diagonal LCD
72.07” WUXGA diagonal LCD
LC550DUT-SEF1(55LM9600-DA)
LC470DUT-SEF1(47LM9600-DA)
LC470EUH-KEF1(47LM8600-DA)
LC720DUC-SDF1(72LM9500-DA)
4.
Operating Environment
TFT
1) Temp. : 0 ~ 40 deg
2) Humidity : 0 ~ 85%
LGE SPEC
ALEF
Temp.   : 0 ~ 50 deg
Humidity : 20 ~ 90%
5.
Storage Environment
TFT
Temp.   : -20 ~ 60 deg
Humidity : 10 ~ 90%
LGE SPEC
ALEF
Temp.   : -20 ~ 60 deg
Humidity : 10 ~ 90%
6.
Input Voltage
AC100 ~ 240V, 50/60Hz
7.
Power Consumption(Max) = 
LCD(Module) + Backlight(LED)
T480
54.64” 190
W
LC550DUT-SEF1(55LM9600-DA)
46.96” 81
W
LC470DUT-SEF1(47LM9600-DA)
72.07” 385
W
LC720DUC-SDF1(72LM9500-DA)
T240
46.96” 129
W
LC470EUH-KEF1(47LM8600-DA)

Download LG 47LM8600 (CHASSIS:LT23E) Service Manual (Repair Manual)

Here you can view online or download LG 47LM8600 (CHASSIS:LT23E) Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair LG 47LM8600 (CHASSIS:LT23E) LCD. Information contained in LG 47LM8600 (CHASSIS:LT23E) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).