LG 42PA450C-CM (CHASSIS:PA23A) Service Manual ▷ View online
LG Electronics Inc. Display Division
Establish : 2012/01/02
Reform : 2012/01/02
Reform : 2012/01/02
PD23A/B
Adjust specification
LG(55)C2-0661-00
12/ 25
LG electronics
Wb 00 ff White Balance End
RS-232C COMMAND
[CMD ID DATA]
CENTER
(DEFAULT)
Cool Mid Warm
MIN
Cool
Mid Warm
MAX
R Gain
jg
Ja
jd
00
192
192
192
192
G Gain
jh
Jb
je
00
192
192
192
192
B Gain
ji
Jc
jf
00
192
192
192
192
R Cut
64
64
64
128
G Cut
64
64
64
128
B Cut
64
64
64
128
** Caution **
Color Temperature : COOL, Medium, Warm.
One of R Gain/G Gain/ B Gain should be kept on 0xC0, and adjust other two lower than C0.
(when R/G/B Gain are all C0, it is the FULL Dynamic Range of Module)
One of R Gain/G Gain/ B Gain should be kept on 0xC0, and adjust other two lower than C0.
(when R/G/B Gain are all C0, it is the FULL Dynamic Range of Module)
*
Manual W/B process
using adjusts Remote control.
■After enter Service Mode by pushing “ADJ” key,
■Enter White Balance by pushing “►” key at “6. White Balance”.
■Stick the sensor to the center of the screen and select each items(Red/Green/Blue Gain) using
▲/▼(CH +/-) key on
R/C.
■Adjust R/G/B Gain using
/ (VOL +/-) key on R/C.
■Adjust three modes all(Cool/Medium/Warm) : Fix the one of R/G/B Gain and Change the others.
■When the adjustment is completed, Enter “COPY ALL”.
■Exit adjustment mode using EXIT key on R/C.
LG Electronics Inc. Display Division
Establish : 2012/01/02
Reform : 2012/01/02
Reform : 2012/01/02
PD23A/B
Adjust specification
LG(55)C2-0661-00
13/ 25
LG electronics
※
After You finish all adjustments, Press “In-start” button and compare Tool option and Area option
value with its BOM, if it is correctly same then unplug the AC cable.
If it is not same, then correct it same with BOM and unplug AC cable.
For correct it to the model’s module from factory JIG model.
※
Push The “IN STOP KEY” after completing the function inspection. And Mechanical Power Switch
must be set “ON”.
※
To check the coordinates of White Balance, you have to measure at the below conditions.
Picture mode : Vivid, Energy Saving : Off, Below the Advanced control, Dynamic Contrast : Off, Dynamic
Colour : Off
Colour Temp.
Cool Medium Warm
30 0 30
Î Picture Mode change : Vivid Î Vivid(User)
4.3 DDC EDID Write (RGB 128Byte ) Æ Not used any more, Use Auto D/L
■ Connect D-sub Signal Cable to D-Sub Jack.
■ Write EDID DATA to EEPROM (24C02) by using DDC2B protocol.
■ Check whether written EDID data is correct or not.
* For SVC main Ass’y, EDID have to be downloaded to Insert Process in advance.
4.4 DDC EDID Write (HDMI 256Byte) Æ Not used any more, Use Auto D/L
■ Connect HDMI Signal Cable to HDMI Jack.
■ Write EDID DATA to EEPROM(24C02) by using DDC2B protocol.
■ Check whether written EDID data is correct or not.
LG Electronics Inc. Display Division
Establish : 2012/01/02
Reform : 2012/01/02
Reform : 2012/01/02
PD23A/B
Adjust specification
LG(55)C2-0661-00
14/ 25
LG electronics
* For SVC main Ass’y, EDID have to be downloaded to Insert Process in advance.
4.5 EDID DATA
1) All Data : HEXA Value
2) Changeable Data :
*: Serial No : Controlled / Data:01
**: Month : Controlled / Data:00
***:Year : Controlled
****:Check sum
**: Month : Controlled / Data:00
***:Year : Controlled
****:Check sum
4.6 EDID DATA Auto Download
1) Press Adj. key on the Adj. R/C,
2) Select EDID D/L menu.
3) By pressing Enter key, EDID download will begin
4) If Download is successful, OK is display, but If Download is failure, NG is displayed.
5) If Download is failure, Re-try downloads.
2) Select EDID D/L menu.
3) By pressing Enter key, EDID download will begin
4) If Download is successful, OK is display, but If Download is failure, NG is displayed.
5) If Download is failure, Re-try downloads.
Caution:
Never connect HDMI & D-sub Cable when EDID downloaded.
LG Electronics Inc. Display Division
Establish : 2012/01/02
Reform : 2012/01/02
Reform : 2012/01/02
PD23A/B
Adjust specification
LG(55)C2-0661-00
15/ 25
LG electronics
※
Edid data and Model option download (RS232)
NO
Item
CMD 1
CMD 2
Data 0
Enter
download MODE
Download
‘Mode In’
A A 0 0
When transfer the
‘Mode In’,
Carry the command.
EDID data and
Model option
download
Download
A E 00
10
Automatically download
(The use of a internal Data)
-
Manual Download
※
Caution
* Use the proper signal cable for EDID Download
- Analog EDID : Pin3 exists
- Analog EDID : Pin3 exists
- Digital EDID : Pin3 exists
Caution: -
Never connect HDMI & D-sub Cable at the same time.
- Use the proper cables below for EDID Writing.
-
Download HDMI1, HDMI2 separately because HDMI1 is different from HDMI2.
For Analog EDID
For HDMI EDID
D-sub to D-sub
DVI-D to HDMI or HDMI to HDMI
No.
Item
Condition
Hex Data
1 Manufacturer
ID
GSM
1E6D
2
Version
Digital : 1
01
3
Revision
Digital : 3
03
Click on the first or last page to see other 42PA450C-CM (CHASSIS:PA23A) service manuals if exist.