LG 42PA450C-CM (CHASSIS:PA23A) Service Manual ▷ View online
LG Electronics Inc. Display Division
Establish : 2012/01/02
Reform : 2012/01/02
Reform : 2012/01/02
PD23A/B
Adjust specification
LG(55)C2-0661-00
8/ 25
LG electronics
4. Completed selecting Tool option.
<LM1 EU>
Model Name
HD/FHD
Tool Option 1 Tool Option 2 Tool Option 3 Tool Option 4 Tool Option 5
60PA6500-Z*
49344
50PA6500-Z*
37056
38186
60PA5500-Z* 49312
50PA5500-Z*
FHD
37024
50PA4500-Z*
36864
42PA4500-Z*
HD
24576
21802
3697
54726
10
60PA650T-Z*
49344
50PA650T-Z*
37056
38186
60PA550T-Z*
49312
50PA550T-Z*
FHD
37024
50PA450T-Z*
36864
42PA450T-Z*
24576
21802
3697
53830
170
(42)**
50PA4900-Z*
36992
42PA4900-Z*
HD
24704
38168
3697
54726
522
**
If it is CIS model, Tool option is 42. because this model has not Network.
<LM1 Non-EU>
Model Name
HD/FHD
Tool Option 1 Tool Option 2 Tool Option 3 Tool Option 4 Tool Option 5
60PA6500-T*
49344
50PA6500-T*
FHD
37056
50PA4520-T* 36960
42PA4520-T* 24672
39306
50PA4500-T*
36864
42PA4500-T*
24576
22922
10
50PA4900-T*
36992
42PA4900-T*
HD
24704
39306
3697
54726
522
<LM1 China>
Model Name
HD/FHD
Tool Option 1 Tool Option 2 Tool Option 3 Tool Option 4 Tool Option 5
50PA450C-C*
36864
42PA450C-C*
HD
24576
22922 3697 54726 10
LG Electronics Inc. Display Division
Establish : 2012/01/02
Reform : 2012/01/02
Reform : 2012/01/02
PD23A/B
Adjust specification
LG(55)C2-0661-00
9/ 25
LG electronics
49344
37056
49312
37024
36864
24576
3.1 ADC Process
3.1.1. ADC
■ Enter Service Mode by pushing “ADJ” key,
Caution: Using ‘power on’ button of the Adjustment R/C , power on TV.
※
ADC Calibration Protocol (RS232)
NO
Item
CMD 1
CMD 2
Data 0
Enter
Adjust MODE
Adjust ‘Mode In’
A A
0
0
When transfer the ‘Mode In’,
Carry the command.
ADC adjust
ADC Adjust
A D
1
0
Automatically adjustment
(The use of a internal pattern)
Adjust Sequence
▪aa 00 00 [Enter Adjust Mode]
▪xb 00 40 [Component1 Input (480i)]
▪xb 00 40 [Component1 Input (480i)]
LG Electronics Inc. Display Division
Establish : 2012/01/02
Reform : 2012/01/02
Reform : 2012/01/02
PD23A/B
Adjust specification
LG(55)C2-0661-00
10/ 25
LG electronics
▪ad 00 10 [Adjust 480i Comp1]
▪xb 00 60 [RGB Input (1024*768)]
▪ad 00 10 [Adjust 1024*768 RGB]
▪aa 00 90 End Adjust mode
▪xb 00 60 [RGB Input (1024*768)]
▪ad 00 10 [Adjust 1024*768 RGB]
▪aa 00 90 End Adjust mode
※
Required equipment : Adjustment R/C.
3.2 Function Check
3.2.1 Check display and sound
■ Check Input and Signal items. (cf. work instructions)
1. TV
2. AV (SCART1/SCART2/ CVBS)
3. COMPONENT (480i)
4. RGB (PC : 1024 x 768 @ 60hz)
5. HDMI
6. PC Audio In
* Display and Sound check is executed by Remote controller.
2. AV (SCART1/SCART2/ CVBS)
3. COMPONENT (480i)
4. RGB (PC : 1024 x 768 @ 60hz)
5. HDMI
6. PC Audio In
* Display and Sound check is executed by Remote controller.
☞
Caution : Not to push the INSTOP KEY after completion if the function inspection.
4. Total Assembly line process
4.1 POWER PCB Assy voltage adjustment(Vs voltage adjustment)
z Required Equipment for adjustment
- D.M.M
z Condition for adjustment
- No signal with the snow noise in RF mode
4.2 Adjustment Preparation
Required Equipment
z Remote controller for adjustment
z Color Analyzer ( CS-1000, CA-100,100+,CA-210 or same product
z Color Analyzer ( CS-1000, CA-100,100+,CA-210 or same product
: CH 11 (PDP)
※
Please adjust CA-210, CA-100+ by CS-1000 before measuring
z Auto W/B adjustment instrument(only for Auto adjustment)
z 9 Pin D-Sub Jack(RS232C) is connected to the AUTO W/B EQUIPMENT.
z 9 Pin D-Sub Jack(RS232C) is connected to the AUTO W/B EQUIPMENT.
Before Adjust of White Balance, Please press POWER ONLY key
Adjust Process will start by execute RS232C Command.
★
Color temperature standards according to CSM and Module
LG Electronics Inc. Display Division
Establish : 2012/01/02
Reform : 2012/01/02
Reform : 2012/01/02
PD23A/B
Adjust specification
LG(55)C2-0661-00
11/ 25
LG electronics
★
CS-1000/CA-100+/CA-210(CH 10) White balance adjustment coordinates
and color temperature.
Color Coordinate
CSM
x y
Temp
±
Color Coordinate
Cool
0.276 0.283 11000K
0.002
Medium
0.285 0.293 9300K
0.002
Warm 0.313 0.329 6500K
0.002
※
Connecting picture of the measuring instrument (On Automatic control)
Inside PATTERN is used when W/B is controlled. Connect to auto controller or push Adjustment
R/C POWER-ON Æ Enter the mode of White-Balance, the pattern will come out.
Inside PATTERN is used when W/B is controlled. Connect to auto controller or push Adjustment
R/C POWER-ON Æ Enter the mode of White-Balance, the pattern will come out.
Auto-control interface and directions
1. Adjust in the place where the influx of light like floodlight around is blocked. (Illumination is less
1. Adjust in the place where the influx of light like floodlight around is blocked. (Illumination is less
than 10ux).
2. Adhere closely the Color Analyzer ( CA210 ) to the module less than 10cm distance, keep it with
the surface of the Module and Color Analyzer’s Prove vertically.(80~100°).
3. Aging time
-. After aging start, keep the power on (no suspension of power supply) and heat-run over 5
minutes.
-. Using ‘no signal’ or ‘full white pattern’ or the others, check the back light on.
Auto adjustment Map(RS-232C)
RS-232C COMMAND
[ CMD ID DATA ]
Wb 00 00 White Balance Start
[ CMD ID DATA ]
Wb 00 00 White Balance Start
CSM PLASMA
Cool 11000K
Cool 11000K
Medium 9300K
Warm 6500K
Click on the first or last page to see other 42PA450C-CM (CHASSIS:PA23A) service manuals if exist.