LG 37LG6000 (CHASSIS:LD89D) Service Manual ▷ View online
- 17 -
C
2008
1-1. The whole flowchart which it follows in voltage output state
1. Power Board
No
No
No
Start check
Does not screen
whole comes out?
whole comes out?
Does not low
voltage output comes out?
Does not Inverter
signal output comes out?
No
No
No
Yes
Yes
No
Yes
Is the Interface
signal operated?
2. Check the
Interface signal condition
Yes
Yes
Does not the
INV 24V voltage output comes out?
Yes
Yes
Is it identical with
power off condition?
1. Check the Power off condition
Yes
Does not the
St-by 5V(P-5V) signal comes out?
Yes
Does not the
VSC signal INV_CTL comes out?
Yes
Manufacture enterprise
meaning of a passage
meaning of a passage
No
6. Check the
VSC low Voltage output
Yes
Does not the
AC Detect signal comes out?
Does not the
RL_ON/PWR_ON/OFF comes out?
Does not the VSC
Low Voltage output comes out?
3. Check the
St_by 5V signal circuit
4. Check the
AC Detect signal circuit
5. Check the VSC RL_ON?
PWR_ON/OFF signal
7. Check the VSC INV_CTL signal
8. Check the
INV 24V voltage output circuit
TROUBLE SHOOTING
C
2008
- 18 -
A power cord is plugged in with TV set?
Plug the power cord in.
No
Is AC-INLET connected with the power board?
Yes
Connect the AC-INLET.
No
Are the fuses(F100, F101 or F700) OK on the power board?
Yes
Replace the fuses.
No
Symptom
1) It does not charge at module.
2) Front LED does not work
Check the followings
Is the power board connected with VSC Board though a cable?
Connect a cable.
No
Yes
Yes
2. No Power
Measure output voltages(16V,12V,5V) on the power board.
If the measured values are not a proper value,
replace power board.
C
2008
- 19 -
Symptom
1) No OSD and image occur on the screen.
2) It maintains the condition with the front LED is white.
Check the followings
Does Module control signal OK?
No
Yes
Is the Inverter
OK?
OK?
Is Low/High voltage outputs properly
except stand-by 5V?
No
Replace the
Power board.
No
Check the LCD
Module
Module
Yes
Is the LVDS
cable OK?
cable OK?
Reconnect
the LVDS cable in P501 or P502.
the LVDS cable in P501 or P502.
No
Yes
Is the IC100 (FLI106X0H)
Output normal?
Output normal?
Replace the VSC
No
3. No Raster
C
2008
- 20 -
Click on the first or last page to see other 37LG6000 (CHASSIS:LD89D) service manuals if exist.